Brass Electrical Connector Scrap
Pin and socket scrap from wiring harness connectors (C26000 cartridge brass, 87% Cu). <94% Cu fits HTS 7404.00.30.90 other copper alloy scrap. Recycled for pin stock.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +25.0% | 25% |
| 🇲🇽Mexico | Free | — | Free |
| 🇨🇦Canada | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with attached wiring/insulation
Electrical scrap with cables stays in waste electrical machinery chapter.
If extruded into bars first
Remelted connector brass becomes copper-zinc base alloy bars.
If high precious metal contact points
Au/Pd content predominates classification as precious metal sweepings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Segregate gold-plated contacts; Au content requires separate precious scrap filing
• Plastic housings must be 100% removed; >5% polymer = mixed waste
• Tarnish accelerates; inert atmosphere packing recommended
Related Products under HTS 7404.00.30.90
Brass Plumbing Scrap
Waste brass material recovered from discarded plumbing fixtures like valves, fittings, and pipes, containing less than 94% copper by weight as a copper-zinc alloy. Classified under HTS 7404.00.30.90 because it is scrap of copper alloys (brass per subheading note (a)) with copper content below 94%. This low-grade scrap is typically melted down for recycling into new brass products.
Nickel Silver Musical Instrument Scrap
Scrap from nickel silver (Cu-Ni-Zn) trumpet valves and saxophone keys, copper ~65%, Ni 18%, Zn 17%. <94% Cu qualifies as 'other' copper alloy scrap under HTS 7404.00.30.90 despite nickel content <5% threshold. Recycled for instrument alloys.
Muntz Metal Propeller Scrap
Scrap from Muntz metal (60/40 Cu-Zn) marine propellers and shafts, copper content 58-75% after corrosion. Fits HTS 7404.00.30.90 as other low-Cu (<94%) copper alloy scrap. Source for alpha-beta brass.
Brass Nameplate Scrap
Etched and stamped brass identification plates from machinery/vehicles, copper 85-92% in naval brass alloy. HTS 7404.00.30.90 for miscellaneous <94% Cu copper alloy scrap. Remelt for thin gauge strip.
Brass Valve Stem Scrap
Forged stems and bodies from industrial ball/globe valves (85-10-5 Cu-Zn-Pb), copper 82-90%. HTS 7404.00.30.90 for low-grade alloy scrap. Fodder for forging stock.
Decorative Brass Trim Scrap
Ornamental trim, escutcheons, and pulls from furniture/cabinets (leaded naval brass, Cu 86%). <94% Cu per assay for HTS 7404.00.30.90 classification. Remelt for decorative castings.