Leaded Brass Ammunition Casing Scrap

Spent leaded brass shell casings from military/police ranges, Cu-Zn alloy <94% Cu, >0.3% Pb. Classified as brass scrap under note (a). Popular for reloading and melting.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+25.0%25%
🇲🇽MexicoFree—Free
🇨🇦CanadaFree—Free
🇩🇪GermanyFree—Free
🇯🇵JapanFree—Free

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

9306.90.00Lower: 17.5% vs 25%

If complete cartridges

Munitions parts (Chapter 93) not scrap if functional.

7404.00.60.45Same rate: 25%

If 94%+ copper alloy casings

High copper assay shifts entire hierarchy.

2619.00.30.00Higher: 35% vs 25%

If uranium-depleted casings

Radioactive slag/ash if penetrator material present.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

• Demagnetize and wash to remove steel primers/soil; purity critical

• ITAR/EAR check if military origin; may require export licenses from origin

Related Products under HTS 7404.00.30.45

Leaded Brass Gear Blank Scrap

Machining waste from leaded brass gear blanks for transmissions, copper-zinc <94% Cu, lead >0.3% aiding chip break. Fits HTS brass scrap definition note (a).

Leaded Brass Fire Extinguisher Valve Scrap

Discarded brass valves from fire extinguishers with lead content >0.3%, copper-zinc alloy <94% Cu. Safety equipment recycling waste under brass classification note (a).

Lead-Bearing Brass Plumbing Scrap

Waste scrap from old leaded brass plumbing fittings, valves, and pipes with copper content under 94% and lead over 0.3%, classified as brass alloy scrap per subheading note (a). It consists primarily of copper-zinc alloy remnants from plumbing fixtures designed for machinability. This falls under HTS 7404.00.30.45 due to its brass composition and lead content.

Leaded Brass Musical Instrument Valve Scrap

Scrap valves and pistons from trumpets/trombones made of leaded brass for lubrication, Cu-Zn <94%, Pb>0.3%. Brass alloy waste per note (a). From band instrument repair shops.

Leaded Yellow Brass Water Meter Scrap

Scrap from discarded leaded yellow brass water meters and housings, featuring copper-zinc alloy with >0.3% lead for easy machining, copper <94%. Classified under brass waste per HTS chapter subheading note (a). Typical from municipal utility replacements.

Leaded Brass Faucet Cartridge Scrap

Waste from leaded brass faucet cartridges and stems, copper-zinc base alloy scrap with >0.3% lead and <94% copper total. Meets brass definition in subheading note (a) for tariff purposes. Recovered from residential fixture teardowns.