High-Leaded Tin Bronze C93800 Ingots
C93800 high-leaded tin bronze ingots with 10% tin, 20% lead for exceptional machinability in screw machine products. Tin predominance maintains bronze status despite high lead. Used for high-speed machining applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If marketed as master alloy for lead addition
Functional use determines master alloy status over composition alone.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• High lead requires TSCA certification for environmental compliance
• Proposition 65 labeling may be needed for California distribution
• Separate high-lead alloys in warehousing to prevent cross-contamination claims
Related Products under HTS 7403.22.00.00
Phosphor Bronze C51000 Unwrought Ingots
Unwrought phosphor bronze C51000 ingots containing approximately 5% tin and 0.2% phosphorus, classified as copper-tin base alloy under subheading note (b) because tin predominates over other elements. These are used in manufacturing electrical components and springs. Supplied in large cast form for remelting.
Leaded Tin Bronze C93200 Unwrought Bars
Unwrought SAE 660 (C93200) leaded tin bronze bars with 6-8% tin, 6-8% lead, suitable for bearings and bushings. Meets bronze definition as tin predominates over non-copper elements excluding allowable zinc. Cast in simple rectangular form without further working.
Aluminum Bronze C95400 Unwrought Ingots
C95400 aluminum bronze unwrought ingots with 10-11.5% aluminum, 4% iron, but critically 3.5-5% tin where tin predominates over other individual elements per note (b). Used for heavy-duty gears and marine propellers. High-strength casting alloy.
Silicon Bronze C65500 Unwrought Rods
Unwrought silicon bronze C65500 rods containing 3% silicon, 4.8% tin ensuring tin predominance for bronze classification. Corrosion-resistant alloy used in marine hardware and weld rods. Cast sections not mechanically worked.
Naval Bronze C46400 Unwrought Plates
Unwrought naval bronze C46400 cast plates with 39-42% zinc and 5% tin, but tin content controls classification as copper-tin base per note (b) allowance for zinc up to 10% when tin ≥3%. Traditional propeller and valve alloy.
Manganese Bronze C86500 Unwrought Form
C86500 manganese bronze unwrought castings with 4% tin ensuring bronze classification despite 39% zinc and 3% manganese. High tensile strength for marine castings and gears. Complex alloy meeting tin-dominant criteria.