Galvanized Double Loop Rebar Tie
Corrosion-resistant double loop bar ties made from galvanized iron wire, ideal for outdoor construction sites securing rebar in concrete pours. The zinc coating protects against rust in harsh environments. HTS 7326.20.0040 applies to these as double loop articles of iron or steel wire per chapter definition.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 3.9% | +35.0% | 38.9% |
| 🇲🇽Mexico | 3.9% | +10.0% | 13.9% |
| 🇨🇦Canada | 3.9% | +10.0% | 13.9% |
| 🇩🇪Germany | 3.9% | +10.0% | 13.9% |
| 🇯🇵Japan | 3.9% | +10.0% | 13.9% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If used in structural steel fabrication sets
Wire ties integral to steel structures may classify as parts of 7308 rather than standalone wire goods.
If featuring screw threads or eyelets
Threaded wire fittings or eye bolts shift to Chapter 73 fasteners heading 7318.
If for coated wire not specifically double loop
Other coated steel articles without defined loop form go to residual 'other' provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for zinc coating thickness (ASTM standards) and document to avoid reclassification as plain wire
• Ship in bulk coils or boxes labeled for industrial use, not consumer packs, to stay in industrial tariff lines
• Check for country-of-origin steel surcharges if from specific producers under trade remedies
Related Products under HTS 7326.20.00.40
16-Gauge Double Loop Rebar Tie
A heavy-duty double loop tie made from 16-gauge iron wire, designed specifically for securing reinforcing bars in concrete construction. It features two pre-formed loops that allow quick twisting with tying tools for strong, reliable bonds. Classified under HTS 7326.20.0040 as it is an article of iron or steel wire in the form of a double loop bar tie, with wire diameter under 16 mm.
Black Annealed Double Loop Wire Tie
Flexible double loop ties produced from black annealed iron wire, commonly used for bundling rebar, pipes, or construction materials. The annealing process softens the wire for easier twisting while maintaining strength. Falls under HTS 7326.20.0040 as a double loop wire tie article made from qualifying iron wire under 16 mm cross-section.
Construction Grade Double Loop Wire Tie
Heavy 15-gauge double loop wire ties optimized for high-volume rebar tying in commercial construction projects. Pre-formed loops enable rapid manual or pneumatic tool application. Meets HTS 7326.20.0040 as qualifying iron wire article for double loop bar/wire ties.
Pre-Cut Double Loop Bar Tie
Individually pre-cut double loop ties from low-carbon steel wire, packaged in bulk for concrete reinforcement applications. Ensures consistent sizing for automated tying machines. Classified in HTS 7326.20.0040 for its double loop wire form meeting wire dimension limits.