3/8 Inch J-Bolt Pack with Nuts
J-shaped bent bolts with 9.5 mm (3/8 inch) diameter, hot-dip galvanized, packaged with two nuts per bolt for concrete embedding. HTS 7318.15.2046 applies for these other bent bolts over 6 mm diameter with nuts or washers in shipment. Common in formwork and structural anchoring.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If coach screws or lag bolts
Wood-screw style threads on J-bolts classify as coach screws.
If for use as structural steel connectors
Bent bolts in building frameworks may go to fabricated steel structures.
If non-threaded bent pins or rivets
Lack of threading changes to 'other non-threaded articles'.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Galvanization must be noted; zinc-coated items may have different AD/CVD applicability
• Use ISPM-15 compliant packaging for wooden pallets to avoid fumigation issues
• Confirm thread pitch (coarse vs fine) matches US standards to ease customs acceptance
Related Products under HTS 7318.15.20.46
M10 U-Bolt with Nuts
A U-shaped bent bolt with a 10 mm diameter shank and threads, supplied with matching nuts for securing pipes or structural elements. It falls under HTS 7318.15.2046 as a bent bolt with shank diameter of 6 mm or more, entered with its nuts in the same shipment. Commonly used in automotive and construction applications for clamping round objects.
1/4 Inch Anchor Bolt with Washer
Bent L-shaped anchor bolt with 6.35 mm (1/4 inch) diameter threads and an included flat washer, used for embedding in concrete to secure structures. Classified under HTS 7318.15.2046 due to its bent form, diameter over 6 mm, and co-shipment with washer. Ideal for foundation and machinery mounting.
M12 Eye Bolt with Nut
Forged eye bolt with 12 mm diameter shank, bent to form a closed loop eye for lifting or rigging, including hex nut. This qualifies for HTS 7318.15.2046 as a 'bent bolt' with threads over 6 mm shipped with nut. Widely used in construction hoisting and marine applications.
M16 Hook Bolt with Double Nuts
90-degree bent hook bolt with M16 (16 mm) metric threads, including jam and lock nuts for tensioning. Fits HTS 7318.15.2046 as other bent bolts of 6 mm+ diameter with nuts. Used in formwork, tension rods, and guy wire attachments.
1/2 Inch L-Bolt with Flat Washers
L-shaped bent bolt with 12.7 mm (1/2 inch) diameter, black oxide finish, shipped with zinc-plated flat washers. HTS 7318.15.2046 covers these as other bent bolts >=6 mm with washers. Essential for machinery bases and equipment leveling.
M8 Pipe Saddle Clamp Bolt Set
Pair of M8 (8 mm) bent U-bolts with nuts for pipe saddle clamps, used in HVAC and plumbing supports. Under HTS 7318.15.2046 for bent bolts over 6 mm shipped with nuts. Provides secure, adjustable pipe mounting.