Galvanized A325 Structural Bolt Sets
Hot-dip galvanized A325 structural bolts with 3/4 inch (19 mm) diameter, nuts, and washers for outdoor structural frames like stadiums. Classified in HTS 7318.15.20.30 for structural use and set shipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If headed nails instead of threaded
Non-threaded galvanized fasteners classify as nails.
If post-galvanizing if no longer structural spec
Surface treatment can affect if specs still meet structural grades.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare zinc coating thickness and method (hot-dip vs. electro) to confirm no reclassification
• Ensure galvanizing does not alter 'structural bolt' status per ASTM specs
Related Products under HTS 7318.15.20.30
A325 High-Strength Structural Bolts
A325 structural bolts are high-strength hex head bolts designed for steel-to-steel structural connections in buildings and bridges, with a shank diameter of 6 mm or more and typically supplied with matching nuts and washers. They fall under HTS 7318.15.20.30 as structural bolts due to their use in load-bearing structural applications and compliance with ASTM specifications for tensile strength.
A490 Alloy Structural Bolts
A490 bolts are quenched and tempered alloy steel structural bolts for high-load applications like bridges and towers, featuring diameters from 1/2 inch (12.7 mm) and above, often shipped with heavy hex nuts. Classified under HTS 7318.15.20.30 for their structural designation and shipment with fasteners.
ASTM F3125 Grade A325 Bolts
Updated standard ASTM F3125 Grade A325 bolts replace older A325 specs, used in structural framing with 6 mm+ diameters and shipped as sets with nuts and washers for earthquake-resistant buildings. HTS 7318.15.20.30 applies to these designated structural fasteners.
Heavy Hex Structural Bolts A325M Metric
Metric A325M heavy hex structural bolts with shanks 12 mm and larger for international bridge projects, including nuts and hardened washers for pre-tensioned connections. Qualifies under HTS 7318.15.20.30 as structural bolts shipped together.
A354 Grade BD Structural Bolts
A354 Grade BD alloy bolts for high-pressure structural joints in refineries and towers, diameter 6 mm+, with heavy nuts for flanged connections. HTS 7318.15.20.30 covers these as structural bolts with accompanying fasteners.
F1554 Anchor Structural Bolts
ASTM F1554 Grade 36 anchor bolts embedded in concrete for structural steel columns, with 1 inch (25.4 mm) diameter rods threaded at ends, shipped with nuts. HTS 7318.15.20.30 for structural bolts over 6 mm.