Woven Zinc-Plated Stucco Lath Netting 1mm Wire
This is a galvanized woven wire mesh specifically designed as stucco lath for plaster applications in construction, featuring furred edges for better keying and made from wire with a maximum cross-sectional dimension of 1 mm. It falls under HTS 7314.41.0040 due to its classification as woven wire stucco netting, plated with zinc, furred, not reinforced, and using thin 1 mm wire. The diamond-pattern mesh provides mechanical support for stucco on walls and ceilings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If wire exceeds 1 mm but not over 1.5 mm
Subheading differentiates by maximum wire cross-sectional dimension, moving to .0045 for slightly thicker wire.
If not plated or coated with zinc
Grill, netting, or fencing of wire without zinc plating falls under the non-plated heading in 7314.39.
If configured as structural panels or expanded metal
Expanded metal lath or pre-assembled panels for construction classify under Chapter 73 structures rather than wire cloth.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify wire diameter does not exceed 1 mm with mill certificates to confirm HTS 7314.41.0040 classification and avoid reclassification to thicker wire subheadings
• Ensure galvanization documentation proves zinc plating; non-plated versions classify under 7314.41.0000
• Check for furred edges and absence of supplemental horizontal reinforcement to match the exact stucco netting description
Related Products under HTS 7314.41.00.40
Galvanized Furred Stucco Wire Mesh 20 Gauge 1mm
A 20-gauge woven wire mesh coated with zinc, furred for stucco reinforcement in residential and commercial plastering, using wire not exceeding 1 mm in cross-section. Classified under HTS 7314.41.0040 as woven wire stucco netting that is plated, furred, unreinforced, and thin-wire. It interlocks with plaster for durable wall finishes.
Diamond Pattern Zinc-Coated Stucco Netting 1mm Wire
Diamond-weave galvanized wire netting for stucco lath, with furred selvage and 1 mm max wire dimension, ideal for interior plaster bases. HTS 7314.41.0040 applies to its woven construction, zinc plating, furred stucco-specific design without horizontal reinforcement. Provides superior plaster adhesion in building projects.
1mm Zinc-Plated Woven Stucco Reinforcement Netting
Thin 1 mm wire woven into furred netting, hot-dip zinc coated for corrosion resistance in stucco reinforcement. Precisely matches HTS 7314.41.0040 for plated woven stucco netting without supplemental wire. Standard for exterior and interior plaster systems.
Furred Galvanized Plaster Lath Mesh 1mm Diameter Wire
Furred-edge woven mesh lath plated with zinc for plaster and stucco support, constructed from 1 mm wire conforming to Chapter 73 wire definition (under 16 mm). Fits HTS 7314.41.0040 as unreinforced woven stucco netting. Used extensively in drywall and masonry applications.