Galvanized Furred Welded Wire Reinforcing Mesh 2x2 inch
2x2 inch galvanized welded wire furred mesh specifically for stucco reinforcement on vertical surfaces, with furring dimples at each intersection for drainage and plaster key. No supplemental horizontal wires are present, distinguishing it from heavier fencing products. Meets HTS 7314.31.50.10 for zinc-coated furred stucco netting.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If intended for plasterboard corner bead applications
Specialized plaster accessories have separate statistical suffixes.
If featuring threaded connectors for panel assembly
Fish plates or coupling devices classify under Chapter 73 tubes.
If supplied with removable anchoring screws
Screw/netting sets may classify as assembled articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include tensile strength test results showing compliance with ASTM C1063
• Declare as 'stucco lath only' to prevent reclassification as general mesh
• Pack in protective cardboard separators to prevent edge damage during transit
Related Products under HTS 7314.31.50.10
Exterior Stucco Furred Lath Galvanized Mesh
Heavy-duty galvanized mesh furred lath for exterior stucco applications on wood and metal framing, with precisely spaced furring dimples ensuring proper plaster clearance. Welded construction without supplemental wires qualifies under HTS 7314.31.50.10 as specialized stucco netting.
Galvanized Welded Wire Stucco Lath 3.4 lb
This is a welded wire mesh netting specifically designed as furred stucco lath for exterior plaster applications, with a diamond-pattern grid coated in zinc for corrosion resistance. The furring dimples on each intersection provide the necessary air space between the lath and wall substrate for stucco adhesion. It falls under HTS 7314.31.50.10 as welded wire stucco netting that is furred and not reinforced with supplemental horizontal wire.
Furred Zinc-Coated Stucco Netting 3/8 inch Furring
Zinc-plated welded wire furred stucco netting with 3/8-inch dimples for optimal plaster keying in cement stucco systems. The galvanized coating protects against rust in exterior wall applications, and the design lacks supplemental horizontal reinforcement. Classified under HTS 7314.31.50.10 for its specific stucco lath configuration meeting building code requirements.
Self-Furring Galvanized Welded Stucco Lath 48x96 inch
Self-furring galvanized welded wire stucco lath sheets measuring 48 inches by 96 inches, featuring embossed dimples at weld points for spacing without separate furring strips. The zinc coating ensures durability in moist environments, and it lacks horizontal reinforcement typical of fencing. This product matches HTS 7314.31.50.10 criteria for furred stucco netting.
Diamond-Pattern Furred Stucco Netting Galvanized
Galvanized welded wire with diamond pattern and integral furring for stucco applications on masonry and frame walls, providing mechanical keying for plaster coats. The intersections are solidly welded without additional horizontal wires, fitting the exact description of HTS 7314.31.50.10 for non-reinforced furred stucco netting.
3.4 lb Self-Furring Stucco Wire Lath Galvanized
Standard 3.4 lb self-furring galvanized stucco wire lath made from welded wire mesh with punched dimples creating 1/4-inch furring for superior plaster bond. Zinc plating prevents corrosion in exterior siding applications, without supplemental horizontal reinforcement. Precisely classified under HTS 7314.31.50.10 as furred welded stucco netting.