Galvanized Steel Rigging Rope 9mm IWRC
Heavy-duty 6x36 galvanized wire rope with independent wire rope core (IWRC), 9mm diameter for crane and hoist rigging. HTS 7312.10.90.30 applies as it's a galvanized steel cable/rope under 9.5mm diameter, optimized for high-strength load-bearing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made of stainless steel
Stainless compositions move to dedicated stainless steel rope headings.
If sold as complete sling with eyes/sockets
Assembled slings with terminations classify as finished lifting gear.
If for specific crane parts use
End-use in cranes may trigger parts classification under machinery chapter.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Require proof of IWRC construction and minimum tensile strength; ensure no pre-installed swaging
• Pitfall: confusing with larger diameter crane ropes
Related Products under HTS 7312.10.90.30
Galvanized Steel 6x19 Wire Rope 8mm
This galvanized steel wire rope features a 6x19 construction with a diameter of 8mm, designed for general industrial lifting and rigging applications. It falls under HTS 7312.10.90.30 as it is a galvanized rope of iron or steel with a diameter not exceeding 9.5mm, not electrically insulated. The zinc coating provides corrosion resistance for outdoor use.
Galvanized 7x7 Aircraft Cable 5mm
A flexible 7x7 stranded galvanized steel cable with 5mm diameter, commonly used for control cables in machinery and winch lines. Classified under HTS 7312.10.90.30 due to its galvanized finish, rope construction, and diameter under 9.5mm. Provides durability in marine and outdoor environments.
Galvanized 6x12 Wire Rope 6mm
Medium flexibility galvanized 6x12 construction wire rope, 6mm diameter, ideal for guy lines and tensioning applications. Falls under HTS 7312.10.90.30 for galvanized steel ropes/cables not exceeding 9.5mm diameter.
Galvanized Plastic Coated Jackline 7mm
Galvanized steel core jackline rope with thin plastic coating, 7mm overall diameter for sailing safety lines. HTS 7312.10.90.30 covers the galvanized steel rope base under 9.5mm, where plastic is incidental protection.
Galvanized Steel Winch Cable 9.5mm
9.5mm diameter galvanized 6x19+IWRC wire rope specifically for ATV/UTV winches, providing abrasion resistance. Classified in HTS 7312.10.90.30 as galvanized cable/rope exactly at the 9.5mm diameter limit.
Galvanized 1x19 Guy Strand 4mm
High-strength 1x19 galvanized strand, 4mm diameter for utility pole guy wires and overhead lines. HTS 7312.10.90.30 for small-diameter galvanized steel rope used in tension applications.