Brass Plated Steel Wire Rope 1/4 Inch
A 1/4 inch diameter wire rope made from brass plated steel wires twisted into strands, used for rigging and lifting applications. It falls under HTS 7312.10.80.00 as it is a rope of brass plated wire, not electrically insulated, fitting the chapter definition of wire products with cross-sections under 16 mm.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not brass plated, e.g., galvanized or plain steel
Ropes of other iron/steel plating or finishes fall under the general 'other' subheading excluding brass plated.
If made primarily of synthetic fibers twined with the wire
Twine, cordage, or rope incorporating man-made fibers changes classification to Chapter 56 for textile cordage.
If sold as pre-formed chain slings rather than loose rope
Assembled slings and similar articles of iron/steel wire rope are classified under heading 7315 for chain/sling products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify plating composition meets 'brass plated' criteria via lab testing to avoid reclassification
• Provide mill test certificates confirming steel base and brass plating thickness for customs clearance
• Watch for over 16mm cross-section dimensions, which exceed chapter wire definition and shift to other headings
Related Products under HTS 7312.10.80.00
3/8 Inch Brass Plated Steel Cordage
Heavy-duty 3/8 inch cordage from brass plated steel wires, suitable for industrial hoisting and towing. It qualifies for HTS 7312.10.80.00 as cordage other than stranded wire, explicitly made of brass plated wire per the statistical note.
Brass Plated Wire Rope Sling Material
Unterminated brass plated wire rope sold by the meter for custom sling fabrication in construction. Falls under HTS 7312.10.80.00 as it's rope of brass plated wire, distinct from finished slings.
1/8 Inch Brass Plated Control Cable
Fine 1/8 inch brass plated steel cable used in mechanical control systems like throttle or brake cables. Classified in HTS 7312.10.80.00 for its brass plated wire construction as non-insulated cable.
Brass Plated Stainless Steel Wire Rope
Corrosion-resistant wire rope of stainless steel wires with brass plating for enhanced lubricity. HTS 7312.10.80.00 applies as 'of brass plated wire' regardless of steel base alloy, per hierarchy.
Brass Plated Guy Wire for Antennas
Brass plated steel guy wire for supporting antennas and towers, providing weather resistance. Fits HTS 7312.10.80.00 as specialized cable of brass plated wire.
Brass Plated Picture Hanging Wire
Thin brass plated wire rope for picture frame suspension in galleries. HTS 7312.10.80.00 for decorative cordage of brass plated wire.