Stainless 6x12 Low Twist Standing Rigging 7mm
6 strands of 12 wires stainless steel with low lay for yacht standing rigging that maintains straightness under load. 7312.10.1050 classification for specific stainless low-lay stranding.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Sworn yield strength declaration required for rigging
• Avoid insulation or electrical reclassification
• Customs binding ruling recommended for lay verification
Related Products under HTS 7312.10.10.50
Instrument Grade SS Low Lay 2mm
Precision stainless stranded wire 1x19 low twist for laboratory instruments and medical device pull wires. 7312.10.1050 due to stainless low-lay stranding specs.
Low Twist SS Balcony Cable 8mm
Stainless steel 7x19 low lay stranded wire for modern balcony railings and safety barriers in construction. Classifies under 7312.10.1050 matching stainless low-twist criteria.
Stainless Steel 1x19 Aircraft Cable 3mm
This stranded wire consists of 19 strands of stainless steel twisted with a lay of less than 1 revolution per 8.5 times the strand diameter, ideal for aircraft control cables and guy wires. Classified under HTS 7312.10.1050 due to its specific low-lay twist and stainless steel composition, distinguishing it from ropes or more twisted cables.
Stainless Steel 1x7 Guy Wire 2.5mm
Single strand with 6 outer wires twisted at low lay for antenna guy wires and structural support in telecommunications towers. HTS 7312.10.1050 applies to this stainless steel stranded product with twist not exceeding the specified lay limit.
Stainless 1x37 Low Lay Control Cable 6mm
High-strand count stainless steel wire with minimal twist for precise control cables in machinery and robotics. Meets HTS 7312.10.1050 criteria as stainless stranded wire with lay ≤1 rev per 8.5 strand diameters.
316 Stainless Low Twist 19x7 Wire Rope 3.5mm
Corrosion-resistant 316 grade stainless stranded wire, 19x7 configuration with low lay for architectural balustrades and safety lines. HTS 7312.10.1050 due to stainless steel and exact lay specification.