Unmachined Steel Cross Fitting 3 Inch
Four-way cross pipe fitting roughly forged from nonalloy steel, 75 mm ID, for butt welding in irrigation systems. No machining post-forging per HTS 7307.93.3010 for iron/nonalloy butt welding fittings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If designed for high-pressure service
High-pressure rated fittings shift to specialized 'other' categories with different rates.
If imported as unfinished forgings before shaping into fittings
Railway-specific or general forgings are classified prior to final fitting formation.
If as parts of truck chassis systems
Vehicle-specific end-use moves classification to motor vehicle parts chapters.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Affix 'rough forged - unmachined' labels and reference in commercial invoice for CBP review
• Measure all internal diameters accurately; even slight over 360 mm triggers different duty
• Pair with proper steel import licenses if from quota-restricted countries
Related Products under HTS 7307.93.30.10
Forged Carbon Steel Butt Weld Elbow 4 Inch
A rough forged elbow fitting made of nonalloy steel with an inside diameter of 100 mm, designed for butt welding in low-pressure piping systems. It is not machined, tooled, or otherwise processed after forging, qualifying it directly under HTS 7307.93.3010 due to its unrefined state and material composition.
Forged Nonalloy Steel Tee Fitting 6 Inch ID
Rough-forged straight tee pipe fitting of iron or nonalloy steel, inside diameter 152 mm, for butt welding in industrial water lines. Unmachined after forging, it matches HTS 7307.93.3010 specifications for unprocessed butt welding fittings under 360 mm ID.
Rough Forged Steel Reducer 2 to 4 Inch
Concentric reducer fitting forged from nonalloy steel, reducing from 50 mm to 100 mm ID, for butt welding in gas pipelines. Not tooled or machined post-forging, fitting HTS 7307.93.3010 for unprocessed iron/nonalloy steel butt weld fittings.
Forged Nonalloy Steel Lateral 5 Inch
90-degree lateral wye fitting forged rough from iron/nonalloy steel, 125 mm ID, butt weld type for sewer lines. Qualifies under HTS 7307.93.3010 as unprocessed post-forging butt fitting.
Rough Forged Pipe Coupling Sleeve 10 Inch
Cylindrical sleeve coupling forged from nonalloy steel, 250 mm ID, for straight butt welding pipe joints. Unmachined after forging, per HTS 7307.93.3010 specifications.
Forged Iron Butt Weld Cap 8 Inch
End cap fitting forged from cast iron or nonalloy steel, 200 mm ID, for sealing butt weld pipe ends in construction plumbing. Remains unprocessed after forging, aligning with HTS 7307.93.3010 criteria.