Alloy Steel Reducing Flange 10x6 Inch
Reducing weld neck flange alloy steel, 10-inch to 6-inch ID (152 mm min), for transitioning pipe sizes. Under HTS 7307.91.50.30 for non-stainless alloy flanges <360 mm. Maintains pressure rating across sizes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If treated as concentric reducer fitting
Functional similarity to reducers may shift subheading.
If highly specialized large-scale reducing
Potential other statistical notes for complex flanges.
If rough castings not fully machined
Incomplete fittings remain in semi-finished tubes chapter.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare both large/small IDs; ensure smallest governs <360 mm
• Avoid reducer classification under 7307.93
Related Products under HTS 7307.91.50.30
Alloy Steel Weld Neck Flange 150#
A weld neck flange made of alloy steel (not stainless), with an inside diameter of 8 inches (203 mm), designed for high-pressure piping systems in oil and gas applications. It falls under HTS 7307.91.50.30 as a flange of alloy steel with inside diameter less than 360 mm. The long tapered hub provides strength and reduces stress concentration at the weld.
Alloy Steel Slip-On Flange 300#
Slip-on flange of chrome-moly alloy steel, inside diameter 4 inches (102 mm), pressure rated 300#, used in boiler and pressure vessel connections. Classified under HTS 7307.91.50.30 due to its alloy steel construction (except stainless) and ID below 360 mm. It slips over the pipe end and is fillet welded for secure attachment.
Chrome-Moly Steel Blind Flange 600#
Blind flange constructed from ASTM A182 F11 chrome-moly alloy steel, 6-inch ID (152 mm), class 600, used to seal pipe ends in high-temperature refineries. HTS 7307.91.50.30 applies as it's an alloy steel flange (non-stainless) under 360 mm ID. Provides full sealing without internal bore.
Alloy Steel Socket Weld Flange 4 Inch
Socket weld flange of low-alloy steel, 4-inch nominal size (ID ~102 mm), for high-pressure instrumentation lines. Falls under HTS 7307.91.50.30 as non-stainless alloy steel flange less than 360 mm ID. Pipe inserts into socket and is fillet welded.
F5 Alloy Steel Raised Face Flange 250#
ASTM A182 F5 alloy steel flange with raised face, 10-inch ID (254 mm), 250# rating for petrochemical plants. HTS 7307.91.50.30 for alloy (non-stainless) steel flanges under 360 mm ID. Raised face ensures leak-proof gasket sealing.
Alloy Steel Long Weldneck Flange 12 Inch
Long weld neck flange from P11 alloy steel, 12-inch ID (305 mm, under 360), for high-stress furnace piping. Under HTS 7307.91.50.30 as non-stainless alloy flange. Extended hub for better flow and weld strength.