304 Stainless Steel Rectangular Pipe 3x1.5 Inch 2mm
Welded 304-grade stainless steel rectangular hollow profile with 3x1.5 inch dimensions and 2mm wall thickness, fitting HTS 7306.61.70.30 for stainless alloy steel, noncircular rectangular section under 4mm wall. Commonly used in furniture frames and architectural elements.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If wall thickness 4mm or greater
Thicker-walled square/rectangular stainless profiles use 7306.61.10, differentiating by structural strength.
If made from stainless steel bars
Certain stainless hollow sections from bar stock may classify under Chapter 72 for semi-finished products.
If for use in specific machinery structures
If dedicated to machinery/equipment assembly, may shift to Chapter 73 machinery-specific headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide chemical composition analysis to prove stainless steel alloy status per Chapter 72/73 notes
• Avoid common pitfall of mismeasuring cross-section; rectangular must not exceed square subheading scope
• Label with exact dimensions and wall thickness on commercial invoice for CBP verification
Related Products under HTS 7306.61.70.30
Stainless Steel Square Tubing 2x2 Inch 1.5mm Wall
Welded stainless steel square tube with 2-inch outer dimensions and wall thickness under 4mm, classified under HTS 7306.61.70.30 due to its noncircular square cross-section, alloy steel composition, and stainless steel material. Used in structural frameworks and machinery guards. Meets the criteria for welded hollow profiles of iron or steel.
316L Stainless Steel Square Hollow Section 50x50mm 1.2mm
Metric-sized welded 316L stainless steel square hollow section, 50mm x 50mm with 1.2mm wall, under HTS 7306.61.70.30 as stainless steel welded noncircular tube of square cross-section less than 4mm thick. Ideal for corrosive environments like marine applications.
Stainless Steel Box Section 4x2 Inch 0.8mm Wall
Thin-walled welded stainless steel rectangular box section 4x2 inches with 0.8mm thickness, precisely matching HTS 7306.61.70.30 for stainless square/rectangular welded tubes under 4mm wall. Used in lightweight conveyor frames.
Duplex Stainless Steel Rectangular Tubing 100x50mm 3mm
High-strength duplex stainless steel (e.g., 2205) welded rectangular tubing 100x50mm with 3mm wall thickness, under HTS 7306.61.70.30 as stainless alloy noncircular profile. Suited for offshore platforms.
Polished Stainless Steel Square Profile 1x1 Inch 1mm
Mirror-polished #8 finish stainless steel square profile 1-inch sides, 1mm wall, welded construction fitting HTS 7306.61.70.30 for decorative stainless hollow sections. Popular for retail fixtures.
Stainless Steel RHS 75x50mm 2.5mm Wall
Rectangular hollow section (RHS) of stainless steel, 75x50mm with 2.5mm wall thickness, welded, classified in HTS 7306.61.70.30 for thin-walled stainless noncircular tubes. Standard for construction scaffolding.