Cold-Rolled Incoloy 825 Corrosion Resistant Alloy Tube
Cold-rolled welded Incoloy 825 nickel-iron-chromium alloy steel tube, 3.5-inch OD, 3.2 mm wall, for marine and chemical applications. Classified in HTS 7306.50.50.30 for cold-reduced welded circular tubes of other alloy steel with adequate wall thickness. Excellent resistance to pitting and stress corrosion.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If non-cold-reduced processing
Hot-worked versions without cold-reduction go to different cold-rolled subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Nickel content certificates distinguish from standard alloys; check special chemical apparatus rulings; hydrostatic test reports often required
Related Products under HTS 7306.50.50.30
Cold-Rolled 316 Stainless Steel Tube 2-inch OD
A welded, cold-rolled tube made from 316 alloy steel with a 2-inch outer diameter and wall thickness of 2 mm, used in chemical processing equipment. It falls under HTS 7306.50.50.30 as a cold-reduced welded tube of circular cross section from other alloy steel with wall thickness over 1.65 mm. The cold-rolling process enhances surface finish and dimensional accuracy for demanding applications.
Cold-Drawn Alloy Steel Hydraulic Cylinder Tube
Cold-drawn welded tube from 4140 alloy steel, 3-inch OD with 3 mm wall thickness, precision-finished for hydraulic cylinder liners in heavy machinery. Classified under HTS 7306.50.50.30 due to its welded construction, circular cross section, cold-reduction process, and alloy steel material with sufficient wall thickness. Ideal for high-pressure fluid transfer.
Cold-Rolled 4130 Chromoly Steel Tube
Welded, cold-rolled 4130 chromoly alloy steel tube, 1.5-inch OD, 2.5 mm wall, popular in automotive roll cages and bicycle frames. Meets HTS 7306.50.50.30 criteria as cold-reduced, welded circular tube of other alloy steel with wall over 1.65 mm. Offers high strength-to-weight ratio.
Cold-Reduced Duplex Alloy Steel Pressure Tube
Cold-reduced welded tube from duplex 2205 alloy steel, 4-inch OD, 4 mm wall thickness, for high-pressure oil & gas lines. Falls under HTS 7306.50.50.30 as other alloy steel, welded circular tube, cold-processed with thick walls. Corrosion-resistant for harsh environments.
Cold-Drawn 15-5PH Precipitation Hardening Steel Tube
Welded cold-drawn tube of 15-5PH PH stainless alloy steel, 2.5-inch OD, 2.8 mm wall, for aerospace structural components. HTS 7306.50.50.30 applies to its cold-reduced welded form, circular section, other alloy steel composition, and wall thickness. Provides superior strength after heat treatment.
Cold-Reduced Hastelloy C-276 Alloy Steel Tube
Welded, cold-reduced Hastelloy C-276 superalloy steel tube, 1-inch OD, 2 mm wall, for severe corrosive environments like flue gas desulfurization. Meets HTS 7306.50.50.30 as other alloy steel, circular welded tube, cold-processed, wall >1.65 mm. Exceptional resistance to acids and chlorides.