Stainless Steel Hypodermic Tube 9.5mm OD
Welded 304 hypodermic-grade stainless tube, 9.5 mm OD, 2 mm wall, 9.5% nickel. Fits HTS 7306.40.50.64 criteria: welded stainless circular, small OD, thick wall, nickel content. Precision use in medical devices and injectors.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If seamless hypodermic grade
Seamless precision tubes classify under 7304 for non-welded construction.
If ground/sharpened into syringe needles
Finished medical needles shift to Chapter 90 instruments.
If exotic alloys like 316Ti with higher Ni
Special stainless with ≥24% Ni or other elements moves out of 7306.40.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Medical device tubes need FDA regs alongside HTS; certify biocompatibility separately
• Tight tolerances require gauge certification; customs verifies OD/wall micrometrically
• Avoid 'needle' declaration; plain tubes stay in 7306, finished needles in 9018
Related Products under HTS 7306.40.50.64
Stainless Steel Instrumentation Tubing 19mm OD
Welded 304 stainless instrumentation tube, 19 mm OD, 1.8 mm wall, 9% nickel. Matches HTS 7306.40.50.64 for welded stainless circular tubes with thick walls, small OD, and specified nickel. Used in analytical instruments and pressure gauges.
304 Stainless Steel Welded Tube 25.4mm OD
A welded stainless steel tube with 1 inch (25.4 mm) outside diameter, wall thickness of 2 mm, containing 8-10.5% nickel. Classified under HTS 7306.40.50.64 due to its circular cross-section, welded construction, stainless steel composition with nickel content between 0.5% and 24%, OD ≤114.3 mm, and wall ≥1.65 mm. Used in food processing equipment for corrosion resistance.
316L Stainless Steel Pipe 50mm OD
Welded 316L stainless steel pipe, 50 mm OD, 3 mm wall thickness, with 10-14% nickel content. Fits HTS 7306.40.50.64 as a welded, circular stainless steel hollow profile with specified OD limit, thick wall, and nickel range. Ideal for pharmaceutical piping systems requiring high corrosion resistance.
321 Stainless Steel Welded Tube 38mm OD
Welded 321 stabilized stainless tube, 38 mm OD, 2.5 mm wall thickness, 9-12% nickel. Classified in HTS 7306.40.50.64 for its circular welded stainless profile, thick wall, small diameter, and nickel content. Suited for high-temperature exhaust systems.
310 Stainless Steel Process Pipe 76mm OD
Welded 310 high-temperature stainless pipe, 76 mm OD, 4 mm wall, 19-22% nickel. Falls under HTS 7306.40.50.64 as welded circular stainless steel tube/pipe, OD ≤114.3 mm, thick wall, nickel <24%. For furnace and heat exchanger applications.
304 Stainless Steel Sanitary Tubing 12.7mm OD
Welded 304 sanitary-grade stainless tubing, 12.7 mm OD, 1.65 mm wall, 8% nickel. HTS 7306.40.50.64 applies to this small-diameter, thick-walled, welded circular stainless tube with nickel in range. Used in beverage and dairy processing lines.