Medical Grade Thin-Wall Stainless Tubing
Welded stainless steel tubing for catheters, with >0.5% nickel, wall <1.65 mm, circular cross-section. HTS 7306.40.1015 applies to this thin, high-nickel welded tube used in disposable medical devices.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If formed into catheter tubes
Tubular medical instruments classify functionally in 9018.
If thicker wall variants
Wall thickness dictates precise subheading placement.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Comply with 21 CFR labeling for medical device components
• Provide biocompatibility test results for smooth clearance
• Watch for reclassification if pre-cut to exact device lengths
Related Products under HTS 7306.40.10.15
Precision Automotive Sensor Tubing
Welded stainless tube for oxygen sensors, thin wall <1.65 mm, nickel >0.5%, circular. Fits 7306.40.1015 as other qualifying stainless tube.
Electropolished Sanitary Tubing
Electropolished welded 316L tubing, <1.65 mm wall, high nickel, for dairy/biopharma. 7306.40.1015 classification despite surface finish.
Cryogenic Transfer Stainless Tubing
Welded thin-wall stainless for LNG/LOX transfer, >0.5% Ni, circular <1.65 mm. HTS 7306.40.1015 for material spec match.
Microbore Stainless Steel Tubing
0.010" ID microbore welded tubing, high nickel stainless, wall <1.65 mm circular. Classifies 7306.40.1015 despite small size.
Beverage Dispensing Stainless Line
Thin-wall welded stainless tubing for beer/coffee lines, circular, >0.5% Ni, <1.65 mm wall. HTS 7306.40.1015 for general welded stainless tubes.
316L Stainless Steel Capillary Tubing
Welded capillary tubing of 316L stainless steel containing over 0.5% nickel, with wall thickness less than 1.65 mm and circular cross-section. Classified under 7306.40.1015 for its thin walls and high-nickel stainless composition, used in laboratory and instrumentation applications.