Schedule 40 Welded Steel Pipe 2 Inch
Welded carbon steel pipe with a 2-inch (50.8 mm) outside diameter and wall thickness of 3.91 mm, conforming to ASTM A53 Schedule 40 standards. Classified under HTS 7306.30.5056 due to its welded construction, circular cross-section, non-alloy steel material, and OD not exceeding 50.8 mm with wall ≥1.65 mm. Commonly used for water and gas distribution lines.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outside diameter exceeds 114.3 mm
Larger OD pipes shift to the next size subcategory within the same welded non-alloy steel heading.
If made of alloy steel instead of non-alloy
Alloy steel composition (e.g., >1.65% Mn or other alloys) moves it to Chapter 73 alloy headings.
If seamless rather than welded
Seamless tubes of circular cross-section fall under 7304, distinct from welded/open-seamed in 7306.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify mill test reports (MTRs) certify non-alloy steel composition to avoid alloy steel reclassification
• Include ASTM A53 or equivalent standard documentation; ensure country-of-melt/origin labeling per TPSC rules
• Watch for anti-dumping duties on certain origins; declare exact OD/wall measurements precisely
Related Products under HTS 7306.30.50.56
Welded Steel Tube for Handrails 48mm OD
Welded carbon steel tube, 48 mm OD, 2.5 mm wall, polished finish for structural handrails and guardrails. HTS 7306.30.5056 applies to its welded circular profile, non-alloy steel, small OD ≤50.8 mm, and wall ≥1.65 mm. Used in architectural and safety applications.
Welded Steel Strut Channel Pipe 50mm
Circular welded steel pipe 50 mm OD, 2.2 mm wall, used as insert for metal strut channels in electrical supports. HTS 7306.30.5056 for its base welded non-alloy circular form factor. Support role doesn't change tube classification.
Low Pressure Gas Line Steel Pipe 1-1/4 Inch
Welded steel pipe nominal 1-1/4 inch (42.4 mm OD), 2.8 mm wall for low-pressure natural gas distribution. Fits HTS 7306.30.5056: welded circular non-alloy steel, small OD, thick wall. Meets relevant pressure piping codes.
Furniture Frame Welded Tube 35mm OD
Welded mild steel tube 35 mm OD, 1.7 mm wall thickness, raw stock for metal furniture frames like tables. HTS 7306.30.5056 covers unfinished welded circular non-alloy steel tubes of this size. Not yet fabricated into furniture.
Galvanized Steel Fence Pipe 1.5 Inch
Hot-dip galvanized welded steel pipe, 1.5-inch (42.4 mm) OD, 2.77 mm wall thickness, for chain-link fence posts. Falls under HTS 7306.30.5056 as a welded, circular non-alloy steel tube with OD ≤50.8 mm and sufficient wall thickness. The galvanization is a surface treatment not affecting base classification.
Black Steel Pipe 50mm OD for Scaffolding
Uncoated black welded steel pipe, 50 mm OD, 3.0 mm wall thickness, standard for scaffolding poles. Classified in 7306.30.5056 for welded non-alloy steel, circular, OD ≤50.8 mm, wall ≥1.65 mm. Essential for construction scaffolding systems.