Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel: > Other, welded, of circular cross section, of iron or nonalloy steel: > Having a wall thickness of 1.65 mm or more: > Other > Other: > With an outside diameter not exceeding 114.3 mm: > Galvanized: > Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7306.30.50.28
Galvanized EMT Conduit 1/2 Inch
This is a 1/2-inch nominal diameter galvanized steel electrical metallic tubing (EMT) with an internal plastic coating, designed specifically for protecting and routing electrical wiring in residential and commercial buildings. It falls under HTS 7306.30.50.28 due to its welded circular cross-section, wall thickness over 1.65 mm, outside diameter under 114.3 mm, galvanization, and non-electrically insulating internal lining optimized for electrical conduit use.
Galvanized EMT Conduit 3/4 Inch
A 3/4-inch galvanized welded steel tube featuring an internal non-conductive coating, standardized for electrical installations to safeguard conductors from physical damage. Classified under HTS 7306.30.50.28 for its circular welded profile, thick walls ≥1.65 mm, small OD, zinc coating, and conduit-specific lining.
1 Inch Galvanized Coated Electrical Conduit
This 1-inch OD galvanized EMT pipe has an internal epoxy or PVC lining that is non-electrically insulating, ideal for conduit in dry or damp locations per NEC standards. It matches HTS 7306.30.50.28 precisely with its nonalloy steel construction, welded seams, thick walls, and conduit designation.
3/4 Inch Zinc-Coated EMT with PVC Lining
Zinc-coated (galvanized) 3/4-inch EMT featuring a thin internal PVC lining that prevents electrical shorting while allowing wire pulls, compliant with UL 797 for conduit. Fits HTS 7306.30.50.28 for galvanized, internally coated, small-diameter, thick-walled welded steel conduit.
Galvanized RMC Conduit 1 Inch with Internal Coating
Rigid Metal Conduit (RMC) 1-inch galvanized with non-electrically insulating internal lining for hazardous location wiring protection. Matches HTS 7306.30.50.28: welded iron steel, thick walls, small OD, galvanized, coated for conduit.
2 Inch Trade Size Galvanized EMT Internally Lined
2-inch trade size galvanized EMT conduit with internal non-insulating coating, used for main electrical feeders in buildings. HTS 7306.30.50.28 due to circular welded nonalloy steel, wall ≥1.65 mm, OD ≤114.3 mm (actual ~2.375 inch), galvanized, conduit-suited.
1/2 Inch Hot-Dip Galvanized Conduit Coated Interior
Hot-dip galvanized 1/2-inch EMT conduit with interior non-conductive coating for corrosion protection in electrical installations. Precisely HTS 7306.30.50.28: welded, circular, nonalloy steel, thick-walled, small OD, galvanized, internally lined for conduit.
Galvanized 1 Inch EMT Type with Liner Coating
Standard 1-inch EMT galvanized steel tubing with factory-applied internal liner coating (non-electrical insulator) for smooth wire installation. Classed in HTS 7306.30.50.28 for meeting all criteria: welded iron/nonalloy, circular, thick wall, small diameter, zinc-coated, conduit use.
Galvanized IMC Conduit 1/2 Inch Internally Lined
Intermediate Metal Conduit (IMC) 1/2-inch size, galvanized with internal non-insulating coating for superior corrosion resistance in electrical raceway applications. HTS 7306.30.50.28 applies to its welded iron/nonalloy steel build, wall thickness >1.65 mm, OD <114.3 mm, and conduit functionality.
1-1/4 Inch Galvanized Electrical Raceway Conduit
Galvanized steel EMT conduit at 1-1/4 inch with internal non-conductive coating for use as electrical raceway in industrial settings. HTS 7306.30.50.28 covers its welded circular nonalloy steel form, ≥1.65 mm walls, <114.3 mm OD, and conduit purpose.