Cold-Rolled Welded Steel Tube 1.5mm Wall
A welded tube of circular cross-section made from nonalloy steel, cold-rolled with a wall thickness of 1.5 mm, suitable for mechanical applications. It falls under HTS 7306.30.50.20 due to its welded construction, cold-rolled finish, and wall thickness between 1.65 mm and 2.54 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled instead of cold-rolled
Hot-rolled welded tubes of similar specs fall under a separate subheading for heat-treated products.
If made of alloy steel
Alloy steel composition changes the heading from nonalloy steel in 7306.30 to 7306.50.
If seamless rather than welded
Seamless tubes, even cold-drawn, are classified in Chapter 73 heading 7304, not welded tubes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify wall thickness certification as it must be precisely 1.65-2.54 mm for this subheading; tolerances over 2.54 mm shift to other codes
• Provide mill test reports confirming cold-rolled process and nonalloy steel composition to avoid misclassification
• Ensure documentation distinguishes welded from seamless to prevent reclassification under 7304
Related Products under HTS 7306.30.50.20
Thin-Wall Cold-Reduced Steel Hollow Profile 2.2mm
Welded hollow profile tube, cold-reduced from nonalloy steel with 2.2 mm wall thickness, used in furniture frames. HTS 7306.30.50.20 applies to its circular welded, cold-rolled specs.
Precision Cold-Reduced Steel Pipe 2.0mm Wall
Cold-reduced welded pipe of nonalloy steel with 2.0 mm wall thickness and circular cross-section, used in automotive exhaust systems. Classified under HTS 7306.30.50.20 for its cold-rolled welded nature and specified wall thickness range.
Industrial Cold-Reduced Steel Tube 2.4mm Wall
Cold-reduced welded nonalloy steel tube, 2.4 mm wall thickness, circular cross-section for conveyor roller shafts. Under HTS 7306.30.50.20 for cold-rolled, welded, thin-wall specs.
Furniture Frame Cold-Reduced Tube 1.9mm Wall
Cold-rolled welded nonalloy steel tube, 1.9 mm thick, for metal furniture legs and frames. HTS 7306.30.50.20 for circular welded cold-rolled tube.
Cold-Rolled ERW Steel Tube 1.8mm Thickness
Electric resistance welded (ERW) cold-rolled tube from nonalloy steel, 1.8 mm wall, circular profile for structural frameworks. Meets HTS 7306.30.50.20 criteria: welded, cold-rolled, 1.65-2.54 mm wall.
Automotive Grade Cold-Rolled Welded Tube 1.7mm Wall
High-precision cold-rolled welded tube of nonalloy steel, 1.7 mm thick circular section for vehicle chassis components. Fits HTS 7306.30.50.20 as other cold-rolled welded tube with wall 1.65-2.54 mm.