Sour Service Resistant Alloy Line Pipe
Alloy steel welded line pipe (16-inch OD) engineered for H2S sour service in oil/gas, per NACE MR0175. HTS 7306.19.51.50 covers its large diameter and pipeline-specific design.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stainless steel sour service pipe
Stainless variants have separate provisions acknowledging higher corrosion resistance.
If fabricated into flanged fittings
Pipe converted to threaded/flanged fittings classifies under 7307.
If part of liquid pumps
If designed as pump discharge piping, it may enter pump classification in Chapter 84.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide NACE MR0175 material certification to prove H2S resistance for customs and end-user acceptance
• Include hardness test results, as sour service grades have strict limits
• Avoid mixing with standard grades in shipments to prevent cross-contamination claims
Related Products under HTS 7306.19.51.50
API 5L X65 Alloy Steel Line Pipe
This is a welded alloy steel line pipe conforming to API 5L X65 specifications, designed specifically for high-pressure oil and gas pipelines with an outside diameter of 16 inches (406.4 mm). It falls under HTS 7306.19.51.50 due to its alloy steel composition, welded construction, and diameter exceeding 114.3 mm, optimized for transporting crude oil or natural gas over long distances.
16-Inch OD X70 Alloy Steel Gas Pipeline Pipe
A high-strength welded alloy steel pipe with 16-inch outside diameter and X70 grade, used in natural gas transmission pipelines. Classified under HTS 7306.19.51.50 for its alloy steel material, line pipe purpose, welded profile, and large diameter exceeding 114.3 mm.
18-Inch Diameter Alloy Steel Oil Line Pipe
Welded alloy steel pipe with 18-inch (457.2 mm) outside diameter for crude oil gathering lines in offshore fields. It qualifies for HTS 7306.19.51.50 as 'other' line pipe of alloy steel with OD >114.3 mm, not dedicated to smaller diameters or specific subtypes.
20-Inch API 5L PSL2 Alloy Line Pipe
Heavy-wall alloy steel welded pipe, 20-inch OD, meeting API 5L PSL2 standards for sour service gas pipelines. HTS 7306.19.51.50 applies to its large diameter, alloy composition, and designation as line pipe for oil/gas transport.
24-Inch OD High-Yield Alloy Steel Pipeline
Extra-large diameter welded alloy steel pipe with high-yield strength for trunk oil pipelines, OD 24 inches (609.6 mm). Fits HTS 7306.19.51.50 precisely as alloy line pipe exceeding 114.3 mm OD.
12-Inch SCH 80 Alloy Steel Gas Line Pipe
Schedule 80 thick-wall welded alloy steel pipe, 12.75-inch OD (323.85 mm >114.3 mm), for high-pressure gas distribution lines. Classified in HTS 7306.19.51.50 for alloy steel line pipe attributes.