ASTM A106 Grade B Seamless Carbon Steel Pipe 14-inch OD 3/4-inch Wall
A seamless pipe per ASTM A106 specifications for high-temperature service, with 355.6 mm (14-inch) OD and 19 mm wall thickness, made from nonalloy steel. Classified under HTS 7304.39.0072 for its circular cross-section, specified OD range, and thick walls suitable for boiler and pressure applications. Ideal for refineries and power plants.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outside diameter ≤285.7 mm
Smaller diameter seamless pipes in the same wall thickness category fall under separate OD subheadings.
If specifically for use in boilers or superheaters
Dedicated boiler tubes, even seamless nonalloy steel, are classified in heading 7307 based on end use.
If imported as parts of turbojet engines
End-use as gas turbine components reclassifies under Chapter 84 machinery parts, not base metal pipes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide material test reports confirming nonalloy steel chemistry to distinguish from alloy grades under 7304.59
• Ensure dimensional compliance with customs inspection; minor OD deviations can trigger reclassification
• Label as 'boiler tube' only if certified; otherwise classify as general pipe to avoid Chapter 73 tube-specific headings
Related Products under HTS 7304.39.00.72
API 5L Grade B Seamless Steel Pipe 16-inch OD 1-inch Wall
This seamless steel pipe of nonalloy steel has an outside diameter of 406.4 mm (16 inches) and a wall thickness of 25.4 mm (1 inch), designed for oil and gas transmission pipelines. It falls under HTS 7304.39.0072 due to its circular cross-section, seamless construction, OD between 285.8 mm and 406.4 mm, and wall thickness of 19 mm or more. Commonly used in high-pressure line pipe applications.
Structural Seamless Steel Hollow Section 15-inch OD 25 mm Wall
Heavy-walled seamless circular hollow profile of nonalloy steel, 381 mm OD and 25 mm wall thickness, used in offshore platform construction. Meets HTS 7304.39.0072 criteria for seamless iron/nonalloy steel tubes with OD 285.8-406.4 mm and walls ≥19 mm. Provides high strength for load-bearing applications.
Heavy Wall Seamless Casing Pipe 12-inch OD 1-inch Wall
Seamless nonalloy steel casing for oil well drilling, featuring 304.8 mm OD and 25.4 mm wall thickness. Fits HTS 7304.39.0072 as a circular seamless tube exceeding 285.8 mm OD up to 406.4 mm with thick walls. Used to line boreholes and support formations.
Pressure Vessel Seamless Pipe 16-inch OD 30 mm Wall
Extra heavy-walled seamless carbon steel pipe for reactor vessels, 406 mm OD and 30 mm thickness. Classified in HTS 7304.39.0072 for nonalloy seamless tubes in the 285.8-406.4 mm OD range with walls over 19 mm. Withstands extreme pressures in petrochemical processing.
Offshore Riser Seamless Steel Pipe 14-inch OD 22 mm Wall
Seamless nonalloy riser pipe for deepwater oil production, 355 mm OD with 22 mm walls. Meets HTS 7304.39.0072 parameters for thick-walled circular seamless steel tubes in the medium-large OD bracket. Corrosion-resistant coating optional for marine environments.
Pile Driving Seamless Steel Pipe 15-inch OD 20 mm Wall
Heavy-duty seamless pipe for foundation piling in bridge construction, 381 mm OD and 20 mm wall. Falls under HTS 7304.39.0072 as a nonalloy seamless circular tube with qualifying dimensions. High impact resistance for hammer-driven installation.