L80 Type 1 Production Tubing 2-7/8 inch
Seamless non-alloy L80 Type 1 steel tubing, 2-7/8 inch (73 mm) OD with 6.45 mm wall thickness, used in oil and gas production wells for fluid transport. Classified in 7304.29.50.15 as iron/non-alloy steel tubing ≤114.3 mm OD and ≤9.5 mm wall for drilling.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If L80 Type 9 or alloy variant
Higher alloy L80 types qualify as alloy steel under 7304.59 for enhanced corrosion resistance.
If other hollow profiles, not round tubing
Non-circular seamless profiles classify under 7306.50 as other hollow sections.
If outside diameter exceeds specified small sizes but ≤114.3 mm
Slightly different size bands within ≤114.3 mm OD may use 7304.29.50.30.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit API monogram or equivalent cert; lack thereof risks higher duties or rejection
• Document exact OD and wall measurements to confirm subheading 7304.29.50.15 eligibility
• Avoid bundling with threaded couplings unless declared separately to prevent set classification
Related Products under HTS 7304.29.50.15
API 5CT N80-1 Oilfield Tubing
Seamless steel tubing made from non-alloy N80-1 grade steel, used as production tubing in oil and gas wells to convey oil or gas from the reservoir. It has an outside diameter not exceeding 114.3 mm and wall thickness ≤9.5 mm, classified under 7304.29.50.15 as non-alloy steel tubing for drilling applications.
J55 Casing Tubing 2-3/8 inch
Seamless J55 grade non-alloy steel tubing with 2-3/8 inch (60.3 mm) OD and wall thickness of 4.83 mm, designed for oil well casing and production tubing in drilling operations. Meets API 5CT standards for oil/gas drilling, fitting 7304.29.50.15 due to size specs and non-alloy composition.
K55 Drill Tubing 3-1/2 inch
Seamless K55 non-alloy steel tubing with 3-1/2 inch (88.9 mm) OD and 7.34 mm wall, employed as drill tubing in oil/gas exploration wells. Fits HTS 7304.29.50.15 for seamless non-alloy casing/tubing with OD ≤114.3 mm and thin walls.
H40 Oil Well Tubing 4 inch
Seamless H40 grade non-alloy steel tubing, 4 inch (101.6 mm) OD with 8.0 mm wall thickness, for oil well production and casing strings. Precisely matches 7304.29.50.15 criteria for small-diameter, thin-walled seamless steel tubing in drilling.
N80Q Non-Alloy Tubing 2-3/8 inch EUE
Seamless N80Q non-alloy tubing with external-upset ends (EUE), 2-3/8 inch OD, 5.21 mm wall, for gas well production. HTS 7304.29.50.15 applies to this small OD, thin-wall seamless steel for oil/gas drilling.
P110 Tubing 3 inch Thin Wall
High-strength P110 non-alloy grade seamless tubing, 3 inch (76.2 mm) OD with 7.01 mm wall thickness, used in high-pressure oil/gas wells. Classifies under 7304.29.50.15 for non-alloy drilling tubing with specified small dimensions.