API 9-5/8 inch 26.4 lb/ft Q-125 Casing
Ultra-high strength Q-125 grade seamless alloy steel casing, 9-5/8 inch OD (244.5 mm), 9.19 mm wall thickness for ultra-deep drilling. HTS 7304.29.41.30 applies due to seamless alloy steel, oil/gas casing purpose, OD 215.9-285.8 mm, thin wall.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made from stainless alloy steel
Stainless steel hollow profiles for drilling use separate cold-finished provisions.
If imported in threaded and coupled sets
Pipe fittings including couplings assembled as sets classify under 7307.
If integral to gas turbine drilling equipment
Specialized components of turbo-drills fall under Chapter 84 machinery parts.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document proprietary quenching process for Q-125 grade approval
• Ensure dimensional inspection reports match API 5CT tolerances
• Common issue: incorrect weight per foot declaration affects duty calculation
Related Products under HTS 7304.29.41.30
API 9-5/8 inch 29.3 lb/ft L-80 Casing
Seamless alloy steel oil well casing pipe with 9-5/8 inch (244.5 mm) outside diameter and wall thickness of 10.54 mm, weighing 29.3 lb/ft, made from L-80 grade alloy steel for oil and gas drilling. It falls under HTS 7304.29.41.30 due to its seamless construction, alloy steel composition, casing use in drilling, OD between 215.9-285.8 mm, and wall thickness under 12.7 mm.
9-5/8 inch 32.35 lb/ft P-110 Casing
High-pressure seamless P-110 alloy steel casing with 9-5/8 inch OD (244.5 mm) and 11.99 mm wall thickness for deep oil/gas wells. Classified under HTS 7304.29.41.30 as seamless alloy steel drilling casing with OD 215.9-285.8 mm and thin wall under 12.7 mm.
10-3/4 inch 40.5 lb/ft T-95 Casing
Seamless T-95 alloy steel casing pipe, 10-3/4 inch (273 mm) OD, 11.58 mm wall thickness, 40.5 lb/ft for sour gas service in oil drilling. Meets HTS 7304.29.41.30 criteria: seamless, alloy steel, drilling casing, specified OD range, wall <12.7 mm.
13-3/8 inch 48 lb/ft C-110 Casing
Seamless C-110 alloy steel conductor casing, 13-3/8 inch (339.7 mm? Wait, adjust to fit: actually 13-3/8 is 339.7mm exceeds 285.8? Note: 285.8mm is 11.25in, 13-3/8=339.7mm too big. Adjust to 10-3/4 max 273mm.