Having a wall thickness of 12.7 mm or more
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: > Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: > Other: > Casing: > Of iron or nonalloy steel: > Other > Having an outside diameter less than 215.9 mm: > Having a wall thickness of 12.7 mm or more
Duty Rate (from China)
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Products classified under HTS 7304.29.20.20
9-5/8 Inch 43 ppf L-80 Casing
Seamless steel oil well casing pipe with 9-5/8 inch outside diameter, 43 pounds per foot weight, and L-80 grade, featuring a wall thickness exceeding 12.7 mm. Designed for oil and gas drilling to line the borehole and protect against collapse. Classified under HTS 7304.29.20.20 due to its seamless construction, nonalloy steel material, small diameter under 215.9 mm, and thick walls.
7 Inch 32 ppf K-55 Casing
Heavy-duty seamless K-55 grade casing with 7-inch OD, 32 lb/ft, and wall thickness over 12.7 mm for high-pressure oil wells. Used to stabilize wellbores during drilling for oil or gas extraction. Fits HTS 7304.29.20.20 as iron/nonalloy steel, seamless, <215.9 mm OD, thick-walled.
8-5/8 Inch 40 ppf J-55 Casing
J-55 grade seamless nonalloy steel casing, 8-5/8 inch diameter, 40 lb/ft, with wall thickness ≥12.7 mm for intermediate oil well sections. Essential for preventing contamination and structural support in drilling. Matches HTS 7304.29.20.20 criteria perfectly.
4-1/2 Inch 12.6 ppf N-80 Casing
N-80 type 1 seamless casing for slimhole drilling, 4-1/2 inch OD, 12.6 lb/ft, wall thickness 12.7 mm or greater. Provides corrosion resistance in sour gas environments. HTS 7304.29.20.20 due to seamless nonalloy steel, small OD, thick wall specs.
5-1/2 Inch 20 ppf L-80 Type 9Cr Casing
L-80 9Cr seamless casing for corrosive environments, 5-1/2 inch OD, 20 lb/ft, wall >12.7 mm. Chromium-enhanced for oil/gas well integrity. Still nonalloy per HTS, classifies under 7304.29.20.20.
6-5/8 Inch 27 ppf P-110 Casing
High-strength P-110 grade seamless casing, 6-5/8 inch OD, 27 lb/ft, wall thickness ≥12.7 mm for deep oil wells. Withstands extreme pressures in drilling operations. HTS 7304.29.20.20: seamless iron/nonalloy, <215.9 mm OD.
10-3/4 Inch 54.5 ppf Heavy Casing
Extra heavy 10-3/4 inch OD, 54.5 lb/ft L-80 casing with wall thickness exceeding 12.7 mm for surface hole protection in oil drilling. Seamless nonalloy steel construction. Qualifies under HTS 7304.29.20.20 small diameter thick wall provisions.
3-1/2 Inch 13.3 ppf Surface Casing
3-1/2 inch OD 13.3 lb/ft J-55 surface casing, seamless, wall ≥12.7 mm for shallow oil/gas wells. Protects freshwater zones during initial drilling. HTS 7304.29.20.20 specs met.
9-5/8 Inch 47 ppf Conductor Casing
47 lb/ft conductor casing 9-5/8 inch OD, thick wall >12.7 mm, seamless nonalloy for initial hole support in offshore drilling. Prevents washouts. Classifies HTS 7304.29.20.20.