Razor Blade Steel Wire 0.25mm x 0.8mm Round Equivalent
Razor blade stainless steel wire 0.25 mm round (equiv 23mm width strip) per note (d). HTS 7229.90.5016 other alloy steel fine wire certified for blades.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If without razor blade certification
Fails note (d) criteria; defaults to stainless flat-rolled 7222 classification.
If pre-formed razor blades
Finished razors/strips become Chapter 82 razors.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Entry certification 'for razor blade manufacture' mandatory per note (d)
• Thickness <0.25mm and Cr ≤14.7% verification
Related Products under HTS 7229.90.50.16
K-Monel Alloy Wire 0.95mm Round
K-Monel (Ni-Cu alloy steel) round wire 0.95 mm for marine fasteners. HTS 7229.90.5016 other alloy near 1 mm limit.
Ball Bearing Steel Wire 0.1mm Ultrafine
Ball bearing steel (SAE 52100) round wire 0.1 mm per note (h) composition for micro-bearings. HTS 7229.90.5016 other alloy ultrafine wire.
Chipper Knife Steel Wire 0.55mm
Chipper knife alloy steel wire 0.55 mm matching note (f) exact composition for industrial blades. HTS 7229.90.5016 other alloy round wire.
AISI 302 Stainless Steel Round Wire 0.8mm
Round wire of AISI 302 austenitic stainless steel with a diameter of 0.8 mm, used primarily for springs and fasteners. Classified under HTS 7229.90.5016 as other alloy steel wire, round cross-section, diameter less than 1.0 mm, not further worked beyond drawing. Meets alloy steel definition due to chromium and nickel content.
Music Wire ASTM A228 0.9mm Round
High-carbon steel alloy round wire per ASTM A228 standard, 0.9 mm diameter, for piano strings and musical instruments. Falls under HTS 7229.90.5016 as other alloy steel round wire under 1.0 mm, cold-drawn without further working. Alloy status from carbon and controlled elements meeting tool steel exclusions.
17-7PH Precipitation Hardening Stainless Wire 0.7mm
17-7PH stainless steel round wire, 0.7 mm diameter, for aerospace springs and high-strength applications. HTS 7229.90.5016 applies to this other alloy steel drawn wire under 1 mm, not meeting stainless or tool steel specifics. Chromium-nickel precipitation hardening alloy distinguishes it.