NiCrMo-82 Welding Rod Wire
0.035 inch (0.9 mm) NiCrMo-82 low-carbon alloy wire for arc welding rods, with Ni >0.3%, Mo >0.08%, C <0.20%. Fits 7229.90.50.08 as round, specialized welding wire without deformations.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cut to length as welding rods
Pre-cut rods for welding treated as electrodes in Chapter 83.
If industrial end-use bars
If not wire-drawn for welding, classifies as alloy bars/sections.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill certs must specify 'suitable for electric arc welding' explicitly
• Check for indentations/ribs—those qualify as reinforcing under Note (c), different heading
Related Products under HTS 7229.90.50.08
625 Alloy Arc Welding Wire
0.045 inch (1.14 mm) 625 alloy wire, round, <0.20% C, Ni/Mo enhanced for submerged arc welding. HTS 7229.90.50.08 for composition and arc process fit.
ERNiCrMo-3 Welding Wire
Round alloy steel welding wire with diameter 1.2 mm, containing less than 0.20% carbon, over 0.3% nickel, and molybdenum, designed for electric arc welding of nickel-chromium-molybdenum alloys. Classified under HTS 7229.90.50.08 due to its specific chemical composition and suitability for arc welding applications. Meets the criteria for low-carbon, high-nickel/molybdenum content in round wire form.
ERNiCr-3 MIG Welding Wire
1.0 mm diameter round wire of nickel-chromium alloy steel for MIG arc welding, with carbon under 0.20%, nickel exceeding 0.3%, and trace molybdenum. Fits HTS 7229.90.50.08 as low-carbon round wire optimized for electric arc welding processes. Used in fabricating corrosion-resistant structures.
Inconel 625 Filler Wire
1.6 mm round cross-section filler wire from Inconel 625 alloy steel, low carbon <0.20%, with >0.3% nickel and >0.08% molybdenum for GTAW arc welding. HTS 7229.90.50.08 applies to its precise composition and welding suitability in aerospace/chemical applications.
ERNiMo-3 TIG Welding Wire
1.4 mm ERNiMo-3 alloy steel wire, round, <0.20% C, high nickel >0.3% and molybdenum >0.08%, certified for TIG electric arc welding. Meets HTS 7229.90.50.08 for specialized low-carbon welding wire applications in marine repairs.
Alloy 625 MIG Spool Wire
Precision 1.2 mm round spool wire of Alloy 625 (Inconel equivalent), low carbon <0.20%, nickel >0.3%, molybdenum >0.08% for MIG arc welding. HTS 7229.90.50.08 captures its composition and electric arc suitability for high-temperature services.