1.2mm Copper-Clad Silico-Manganese Welding Consumable
1.2 mm copper-clad round consumable wire from silico-manganese steel (low C <0.20%, high Mn >0.9%, Si >0.6%), for GMAW electric arc processes. Cladding provides lubricity and arc focus. HTS 7229.20.0010 due to exact material, form, and end-use match.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other alloy steel not silico-manganese
Different elemental balances classify as other alloy wires.
If flux-filled cored wire
Tubular/cored configurations are welding preparations, not solid wire.
If in straight lengths >1.6mm equivalent
Rods/bars (not wire) of similar steel under 7213 if not drawn to wire gauge.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Use 'plated or coated' terminology consistently; cladding counts per Chapter notes
• Batch test for coating weight (typically 2-5 microns) if audited
• Avoid bulk mixing with other diameters; precise measurement required
Related Products under HTS 7229.20.00.10
Copper-Coated Silico-Manganese Welding Wire 1.0mm
Round wire of silico-manganese steel with a diameter of 1.0 mm, containing less than 0.20% carbon, over 0.9% manganese, and more than 0.6% silicon, plated with copper for corrosion protection and conductivity. Specifically designed for electric arc welding applications like MIG and MAG processes. Classified under HTS 7229.20.0010 due to its precise alloy composition, dimensions, and copper coating.
1.2mm Copper-Plated Silico-Manganese MIG Welding Wire
High-performance 1.2 mm diameter round copper-coated wire made from silico-manganese steel alloy (low carbon <0.20%, Mn >0.9%, Si >0.6%), optimized for MIG electric arc welding of structural steel. The copper plating enhances electrical conductivity and feedability in semi-automatic welding. Meets HTS 7229.20.0010 criteria for alloy specs, size, and coating.
0.8mm Copper-Coated ER70Si Silico-Manganese Welding Wire
Precision 0.8 mm round wire of ER70Si-grade silico-manganese steel (C <0.20%, Mn >0.9%, Si >0.6%), copper plated for superior arc stability in gas-shielded electric arc welding. Used in automotive and fabrication industries for clean welds. HTS 7229.20.0010 applies due to its specialized low-carbon alloy, small diameter, and copper coating.
1.6mm Copper-Plated Silico-Manganese MAG Welding Wire
1.6 mm diameter copper-coated round wire from silico-manganese steel (carbon <0.20%, manganese >0.9%, silicon >0.6%), engineered for MAG electric arc welding in heavy fabrication. Copper layer prevents oxidation and improves wire feeding. Fits HTS 7229.20.0010 for its alloy composition, cross-section, size limit, and plating.
1.4mm Copper-Coated Low-Carbon Silico-Manganese Filler Wire
Round 1.4 mm copper-plated filler wire of silico-manganese steel alloy featuring <0.20% carbon, >0.9% Mn, >0.6% Si, tailored for electric arc welding in shipbuilding and pipelines. The plating ensures smooth arc initiation and reduced spatter. Precisely matches HTS 7229.20.0010 parameters.
0.6mm Ultra-Fine Copper-Plated Silico-Manganese Welding Wire
Fine 0.6 mm diameter round wire, copper coated, made from low-carbon (<0.20%) silico-manganese steel (>0.9% Mn, >0.6% Si), for precision electric arc welding in thin-sheet applications. Plating aids in high-speed automated welding. HTS 7229.20.0010 classification based on alloy, size, and coating specs.