M2 Tool Steel Milled Round 11.5mm
M2 molybdenum tool steel (0.85% C, 4% Cr, 5% Mo, 2% V) precision milled round 11.5mm for shear blades. Although high-speed capable, classified as tool steel under 7228.50.10.20 when not meeting high-speed steel specs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If certified as high-speed steel
M2 meeting high-speed steel composition and certification uses high-speed subheading
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document why M2 doesn't meet high-speed steel criteria
• Milled surface geometry specs essential
• Avoid generic 'high-speed' labeling on commercial invoice
Related Products under HTS 7228.50.10.20
SKD61 Tool Steel Ground Round 17mm
SKD61 (H13 equivalent) hot work tool steel 17mm diameter ground round for forging dies. Maximum cross-sectional dimension 17mm qualifies under HTS 7228.50.10.20 tool steel provisions with ground surface.
D2 Tool Steel Ground Round Bar 10mm
A 10mm diameter round bar made from D2 tool steel (1.5% carbon, 12% chromium), cold-finished with ground surfaces for precision applications. Classified under HTS 7228.50.10.20 as tool steel bar (not high-speed) with round cross-section, maximum dimension under 18mm, and ground finish. Meets tool steel definition due to high carbon and chromium content.
O1 Tool Steel Polished Rectangular Bar 12x4mm
O1 oil-hardening tool steel bar (0.9% C, 1% Mn, 1% Cr) in 12mm x 4mm rectangular section with polished surfaces for die making. Fits HTS 7228.50.10.20 as tool steel per note (e)(iii) with rectangular cross-section under 18mm max dimension and polished finish.
A2 Tool Steel Milled Round Rod 14mm
A2 air-hardening tool steel (1% C, 5.25% Cr) round rod, 14mm diameter with milled surfaces for gauge block manufacturing. HTS 7228.50.10.20 applies to tool steel rods with round section under 18mm, specifically milled finish.
S7 Tool Steel Ground Square Bar 15x15mm
S7 shock-resisting tool steel (0.5% C, 3.25% Cr, 1.4% Mo) square bar 15mm x 15mm with ground surfaces for punch applications. Qualifies under 7228.50.10.20 as tool steel with rectangular (square) cross-section under 18mm maximum dimension.
CPM-M4 Tool Steel Polished Round 8mm
CPM-M4 powder metallurgy tool steel (1.4% C, 4% Cr, 4% V, 4% Mo) 8mm round bar with polished finish for high-wear applications. HTS 7228.50.10.20 covers such small-diameter tool steel with specified surface treatments.