17-4 PH Stainless Alloy Steel Bar 110 mm Hot-Rolled
Precipitation-hardening 17-4 PH stainless steel bar hot-rolled to 110 mm diameter for valves and pump shafts. Under HTS 7228.30.80.41 as other alloy steel bars (alloy steel includes certain stainless), hot-rolled, 76-152 mm range. Stainless but not razor blade steel (note d).
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If stainless and further worked
Stainless bars with polishing/coating classify under stainless Chapter 72 headings.
If non-alloy and rectangular
Non-alloy rectangular/square bars 80 mm+ fall under 7214.99.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish from Chapter 72 stainless strip/flat products; round bars stay in 7228 despite stainless composition
• No surface treatments allowed; phosphatizing or coating (Chapter note on 'further worked') requires 7228.60
• Provide spectrometry report for 17% Cr content to confirm not high-strength per note (a)
Related Products under HTS 7228.30.80.41
AISI 4140 Hot-Rolled Alloy Steel Round Bar 100 mm Diameter
AISI 4140 chromium-molybdenum alloy steel round bar, hot-rolled with a diameter of 100 mm, used in oilfield drilling tools and heavy machinery components. Classified under HTS 7228.30.80.41 as other hot-rolled alloy steel bars not further worked, with cross-section between 76-152 mm. Meets alloy steel definition due to chromium and molybdenum content exceeding Chapter 72 note thresholds.
8630 Hot-Rolled Alloy Steel Round Bar 125 mm Diameter
8630 nickel-chromium-molybdenum alloy steel bar, hot-rolled to 125 mm diameter, for gear shafts and axles in heavy trucks. Falls under HTS 7228.30.80.41 as other alloy steel hot-rolled bars 76-152 mm diameter, not further worked. Alloy status confirmed by Ni-Cr-Mo content per Chapter 72 definitions.
Hot-Rolled 4340 Alloy Steel Bar 90 mm Diameter
High-strength 4340 Ni-Cr-Mo alloy steel round bar, hot-rolled at 90 mm diameter for aircraft landing gear and crankshafts. HTS 7228.30.80.41 applies to hot-rolled/extruded alloy steel bars 76-152 mm, not further worked. Exceeds alloy minimums for Cr (0.7-0.9%), Ni (1.65-2.0%), Mo (0.2-0.3%).
Hot-Rolled 8620 Alloy Steel Square Bar 80 mm x 80 mm
8620 carburizing grade alloy steel square bar, hot-rolled with 80 mm cross-section, for transmission gears. HTS 7228.30.80.41 covers hot-rolled alloy bars of any cross-sectional shape 76-152 mm, not further worked. Case-hardening alloy per Cr-Ni-Mo specs.
EN24 Hot-Rolled Alloy Steel Bar 140 mm Diameter
EN24 (817M40) medium carbon alloy steel round bar hot-rolled to 140 mm for heavy forgings and spindles. Fits HTS 7228.30.80.41: alloy steel bars hot-rolled, cross-section 76-152 mm, no further working. Cr-Mo-Ni composition qualifies as other alloy steel.
AISI 4130 Hot-Rolled Alloy Steel Rod 76 mm Diameter
4130 chromoly alloy steel rod, hot-drawn to minimum 76 mm diameter for roll cage tubing precursors. HTS 7228.30.80.41 for hot-drawn alloy steel bars/rods 76-152 mm, other than drill types. Low alloy Cr-Mo per industry standards.