Cold-Rolled Automotive Grade DP Steel Strip
Dual-phase DP600 cold-rolled steel strip, 0.65 mm x 290 mm wide, advanced high-strength alloy for crash structures. HTS 7226.92.80: cold-reduced alloy steel under 300 mm width, >0.25 mm thick.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If wider automotive grade strip
Same DP steel but 300-600 mm width uses different subheading
If coated for corrosion protection
Metal or plastic coatings constitute further working, shifting to Chapter 72 coated steel
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include DP steel microstructure certification and formability test results
• Verify cold-rolling reduction percentage documentation
• Common issue: incorrect alloy vs carbon steel determination
Related Products under HTS 7226.92.80
Cold-Rolled 301 Stainless Steel Strip
Flat-rolled strip of 301 alloy stainless steel, cold-rolled to a thickness of 0.5 mm and width of 250 mm, not further worked beyond cold reduction. Classified under HTS 7226.92.80 as alloy steel (not stainless), width under 300 mm, thickness over 0.25 mm, cold-rolled only. Used in spring manufacturing and flexible components.
Cold-Rolled High-Strength Low-Alloy Steel Coil
Narrow cold-rolled HSLA steel strip measuring 280 mm wide and 0.8 mm thick, minimum yield 355 MPa, slit from wider coil, not further worked. Fits HTS 7226.92.80 as other alloy steel, cold-reduced, narrow width over 0.25 mm thick. Common in automotive structural parts.
Cold-Rolled Silicon-Manganese Steel Strip
Cold-reduced strip of silicon-manganese alloy steel, 0.6 mm thick by 220 mm wide, used for electrical components, no further working applied. HTS 7226.92.80 covers this narrow, thicker cold-rolled alloy steel product. Electrical steels often use such compositions.
Cold-Rolled Tool Steel Grade A2 Flat Stock
Precision cold-rolled A2 tool steel strip, 1.2 mm thick and 290 mm wide, air-hardening alloy for die making, cold-reduced only. Classifies in HTS 7226.92.80 as other cold-rolled alloy steel under 300 mm wide, over 0.25 mm thick.
Cold-Rolled Nickel-Chromium Alloy Steel Ribbon
Narrow cold-rolled Ni-Cr alloy steel ribbon, 0.4 mm thick by 150 mm wide, for resistance heating elements, no additional processing. HTS 7226.92.80 applies to this cold-reduced alloy steel product specs.
Cold-Rolled Spring Steel Strip ASTM A666
Type 301 cold-rolled spring steel strip per ASTM A666, 0.7 mm x 280 mm wide, high yield strength for clip springs. Meets HTS 7226.92.80: alloy steel, cold-rolled, narrow width over 0.25 mm thick, not further worked.