A2 Tool Steel Cold-Reduced Strip 350mm Wide
Cold-rolled A2 air-hardening tool steel sheet (1% carbon, 5% chromium) at 0.8mm thick and 350mm width, in annealed condition without additional surface treatments. Fits HTS 7226.92.1060 for cold-rolled tool steel over 300mm width, ideal for shear blades and forming tools.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If polished or coated
Any surface treatment beyond cold-rolling (per chapter note on 'further worked') shifts to the 'other' worked subheading.
If for stainless tool steel applications
If chromium exceeds 10.5% making it stainless, reclassifies under Chapter 72 stainless cold-rolled products.
If width 600mm or more
Wider cold-rolled tool steel sheets exceed the <600mm width limit of this subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare precise width measurement method (e.g
• average over length) to confirm 300-600mm range; include heat analysis certificate proving tool steel per Note (e)
• Inspect for any polishing which would require 'further worked' classification
Related Products under HTS 7226.92.10.60
Cold-Rolled D2 Tool Steel Sheet 400mm Wide
Flat-rolled D2 tool steel (1.5% carbon, 12% chromium) cold-rolled to 1.2mm thickness and 400mm width, not further worked beyond cold-reduction. Classified under HTS 7226.92.1060 as cold-rolled tool steel (not high-speed) over 300mm but under 600mm width. Used for making precision dies and punches.
O1 Tool Steel Cold-Rolled Plate 450mm Wide
O1 oil-hardening tool steel (0.9% carbon, 1% Mn, 1% Cr, 0.5% W) cold-reduced to 2mm thickness and 450mm width, supplied flat without patterns or coatings. HTS 7226.92.1060 applies to this cold-rolled tool steel width specification for toolmaking.
S7 Tool Steel Cold-Reduced Sheet 380mm Wide
Shock-resistant S7 tool steel (0.5% C, 3.25% Cr, 1.4% Mo) cold-rolled to 1.5mm x 380mm width for impact tools, not further worked. Matches HTS 7226.92.1060 criteria for cold-rolled alloy tool steel in this width range.
CPM-M4 Tool Steel Cold-Rolled Strip 320mm Wide
Powder metallurgy CPM-M4 tool steel (1.4% C, 4% Cr, 4% V, 5% Mo) cold-rolled to precise 0.6mm thickness x 320mm width, uncoated. Classified in HTS 7226.92.1060 as cold-rolled tool steel over 300mm width, not high-speed.
H13 Tool Steel Cold-Rolled Plate 500mm Wide
Hot-work H13 tool steel (0.4% C, 5% Cr, 1.3% Mo, 1% V) cold-reduced to 3mm x 500mm for die casting molds, no additional treatments. HTS 7226.92.1060 for cold-rolled tool steel in 300-600mm width.
L6 Tool Steel Cold-Reduced Sheet 420mm Wide
L6 shock-resisting tool steel (0.7% C, 0.75% Ni, 1.5% Cr, 0.5% Mo) cold-rolled to 1mm x 420mm, supplied mill finish. Fits HTS 7226.92.1060 as cold-rolled tool steel width spec for bandsaw blades.