52100-Modified Cold-Rolled Bearing Steel Plate
Modified AISI 52100 cold-rolled plate stock for custom bearing fabrication, adhering to ball-bearing steel composition limits in HTS note (h) for consistent hardness post-heat treatment. 380 mm width, solely cold-rolled without cladding or enameling, classified 7226.92.1030 for alloy tool steel applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other tool steel not ball-bearing quality
Other alloy tool steel bars/rods (not flat-rolled) classify under 7224.90, by product form.
If width less than 300 mm or statistical variations
Narrower cold-rolled alloy tool steel falls to catch-all 7226.92.9095 subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Detail any 'modified' aspects in entry docs but confirm still within note (h) ranges to avoid tool steel disputes
• Use protective packaging to prevent pre-entry discoloration; no duty relief for rust per regulations
• For plate vs sheet, confirm thickness doesn't trigger universal mill plate note (b) exclusion
Related Products under HTS 7226.92.10.30
Cold-Reduced 100Cr6 Ball Bearing Steel Strip
EN 100Cr6 (equiv. AISI 52100) cold-reduced flat-rolled steel strip for manufacturing precision ball bearings, conforming to HTS Chapter 72 ball-bearing steel definition with controlled low sulfur/phosphorus (≤0.03%) and silicon (0.18-0.37%). Width measures 350 mm, cold-rolled only without further surface treatments, fitting 7226.92.1030 for tool steel of alloy steel over 300 mm wide. Used primarily for bearing rings and rolling elements.
GCr15 Cold-Rolled Alloy Steel for Bearings
Chinese GB/T 18254 GCr15 grade cold-rolled flat steel sheet, equivalent to AISI 52100 ball-bearing steel with exact Chapter 72 note (h) composition for high-fatigue resistance in bearings. 450 mm width, not further worked beyond cold-reduction, specifically for tool steel applications under 7226.92.1030. Ideal for roller and ball production in automotive/industrial sectors.
SUJ2 Ball-Bearing Quality Cold-Reduced Sheet
JIS SUJ2 cold-reduced flat-rolled steel sheet for premium ball bearings, matching HTS ball-bearing steel criteria with tight control on Mn (0.22-0.48%), Ni/Cu (<0.28/0.38%), and Mo (<0.09%). 320 mm width qualifies for 7226.92.1030 as tool steel, cold-rolled only, used in high-speed bearing manufacturing.
AISI 52100 Cold-Rolled Ball-Bearing Steel Sheet
Flat-rolled alloy steel sheet made from AISI 52100 grade, specifically formulated for ball-bearing applications with precise carbon (0.95-1.13%), chromium (1.25-1.65%), and low impurity levels as defined in HTS Chapter 72 note (h). This product is cold-rolled, not further worked, with a width of 400 mm, classifying it under 7226.92.1030 due to its tool steel composition for bearing races and balls. It meets minimum yield and hardness requirements for high-precision rolling elements.