M2 Tool Steel Hot-Rolled Sheet 1mm x 280mm
Thin hot-rolled sheet of M2 high-speed tool steel (0.85% C, 4% Cr, 5% Mo, 6.5% W, 2% V), but classified here as 'other tool steel', 1mm x 280mm for drill blanks. HTS 7226.91.25.60 for hot-rolled tool steel <300mm width, not distinguishing high-speed in this subhead. Used in cutting tool production.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If confirmed high-speed steel
High W/Mo/V levels define high-speed tool steel explicitly excluded here.
If ball-bearing steel per note (h)
Specific C/Cr/Mn/Si limits for bearing applications use separate alloy heading.
If plated/coated surface
Any metallic/nonmetallic coating is 'further worked' per chapter definition.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Distinguish from true high-speed (7226.91.10); certify if borderline composition
• Thin gauge (<3mm) must still meet tool steel chem specs
• Provide heat analysis; end-use statements aid CBP review
Related Products under HTS 7226.91.25.60
A2 Tool Steel Hot-Rolled Strip 1.5mm x 125mm
Hot-rolled flat strip of A2 tool steel (1.55% C, 5.1% Cr, 1.1% Mo, 1% V), measuring 1.5mm thick by 125mm wide, not further worked beyond hot-rolling. Classified under HTS 7226.91.25.60 as flat-rolled alloy tool steel (per U.S. note e(ii)), width <300mm, hot-rolled only. Used for making punches, dies, and forming tools.
D2 Tool Steel Hot-Rolled Sheet 2mm x 200mm
Hot-rolled sheet of D2 tool steel (1.5% C, 12% Cr), 2mm thickness by 200mm width, suitable for shear blades and knives, not further worked. Fits HTS 7226.91.25.60 as other hot-rolled tool steel (U.S. note e(i) >1.2% C and >10.5% Cr), width <300mm. High wear resistance for industrial tooling.
O1 Tool Steel Hot-Rolled Plate 3mm x 250mm
Hot-rolled plate of O1 oil-hardening tool steel (0.9% C, 1% Mn, 1% Cr, 0.2% V), 3mm thick x 250mm wide for blanking dies. Under HTS 7226.91.25.60 as hot-rolled tool steel (note e(iii) >=0.85% C and 1-1.8% Mn), <300mm width, no further working. Ideal for machining into precision tools.
S7 Tool Steel Hot-Rolled Strip 4mm x 150mm
Shock-resistant S7 tool steel hot-rolled strip (0.5% C, 3.25% Cr, 1.4% Mo), 4mm x 150mm for impact tools like chisels. HTS 7226.91.25.60 covers this hot-rolled tool steel (note e(v) >=0.5% C, >=3.5% Mo), width <300mm, not further worked. Excellent toughness for heavy-duty applications.
CPM-M4 Tool Steel Hot-Rolled Plate 2.5mm x 225mm
Hot-rolled plate of CPM-M4 powder metallurgy tool steel (1.4% C, 4% Cr, 4% V, 5.25% Mo), 2.5mm thick x 225mm wide for wear parts. Classed in HTS 7226.91.25.60 as other hot-rolled tool steel (note e(ii)/(v)), <300mm, no further working. Superior abrasion resistance.