T1 Tungsten High-Speed Steel Strip
T1 high-speed steel strip, 200 mm wide by 0.8 mm thick, for drill bit blanks. Falls under 7226.20.00.00 as high-speed steel (18% tungsten, >0.65% carbon) flat-rolled product under 600 mm width. Ideal for high-temperature cutting applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tool steel but not high-speed
Tool steels per note (e) but not high-speed compositions go to specific tool steel subheadings.
If flat-rolled stainless steel
Stainless compositions (>10.5% Cr) classify under Chapter 72 stainless headings.
If width ≥600 mm
Exceeding 600 mm width moves to wider flat-rolled alloy steel category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Chemical analysis must confirm tungsten ≥18% and carbon >0.65% for high-speed steel status
• Strips in coils qualify if flat-rolled; uncoiled count as sheets—document form at entry
• Watch for 'further worked' treatments like polishing, which may shift to 7226.99 if applied
Related Products under HTS 7226.20.00.00
CPM Rex 121 High-Speed Steel Plate
CPM Rex 121 powder metallurgy high-speed steel plate, 300 mm width x 3 mm thick for shear blades. HTS 7226.20.00.00 covers high-speed steel flat products <600 mm wide, meeting note (e) criteria with exceptional wear resistance.
S7 High-Speed Steel Tool Blank Sheet
S7 shock-resisting high-speed steel sheet 250 mm x 2 mm for punch tooling. Classified 7226.20.00.00 for high-speed alloy steel flat-rolled <600 mm, with Cr/V composition per note (e).
PM M4 High-Speed Steel Coil Stock
Powder metal M4 high-speed steel in 400 mm wide coils, 1 mm thick for slitting into saw blades. HTS 7226.20.00.00 for high-speed steel flat-rolled products under 600 mm width.
Rex 76 Cobalt High-Speed Steel Strip
Rex 76 cobalt-alloyed high-speed steel strip 100 mm wide x 0.5 mm for micro-tools. Under 7226.20.00.00 as high-speed steel flat product <600 mm, enhanced red-hardness.
D2 High-Speed Steel Precision Sheet
D2 semi-high-speed steel precision-ground sheet 500 mm x 1.2 mm for dies. HTS 7226.20.00.00 applies to high-speed steel flat-rolled <600 mm despite borderline composition.
M42 Cobalt Molybdenum High-Speed Steel
M42 high-speed steel flat stock 350 mm wide x 2.5 mm for end mills. 7226.20.00.00 for high-speed steel (Co/Mo/W alloy) flat-rolled <600 mm width.