Silicon Steel for EV Motor Cores 0.35mm x 200mm
High-efficiency non-oriented silicon electrical steel for electric vehicle motors, 0.35mm x 200mm, low core loss design. Classified HTS 7226.19.90.00: alloy steel, silicon electrical type, width <300mm. Conforms to chapter alloy definitions, not high-strength or tool steel.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If grain-oriented for EV transformers
GO steel used in static transformers vs NO for rotating motors changes magnetic orientation subheading.
If made into tubes
Fabricated into tubular form exits flat-rolled classification entirely.
If coated for retail motor kits
Insulation coating makes it further worked; retail packaging may trigger set classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include core loss test data in entry docs; verify not heat-resisting steel per note (g); check for vacuum degassing certification
Related Products under HTS 7226.19.90.00
Non-Oriented Silicon Electrical Steel Coil 0.35mm x 150mm
Flat-rolled non-oriented silicon electrical steel with 3.2% silicon content, thickness 0.35mm, width 150mm, used in electric motors and generators. Classified under HTS 7226.19.90.00 as alloy steel of silicon electrical steel type, width less than 300mm, not grain-oriented. Meets chapter definitions for alloy steel with silicon additions for electrical properties.
CRGO Silicon Steel Strip 0.27mm x 250mm
Cold-rolled grain-oriented silicon electrical steel strip, 0.27mm thick, 250mm wide, for transformer cores with directional magnetic properties. Falls under HTS 7226.19.90.00 as 'other' silicon electrical steel (non-grain-oriented subheading applies broadly before width spec), width under 300mm. Alloy steel per chapter notes with silicon for low core losses.
Thin Gauge NOES 0.20mm x 120mm for Appliances
Ultra-thin non-oriented electrical steel (NOES) sheet, 0.20mm thickness, 120mm width, optimized for small appliance motors like fans and pumps. HTS 7226.19.90.00 covers flat-rolled silicon electrical steel under 300mm width, alloy composition with 2.5-3.5% silicon. Not further worked, in coil form.
Industrial Motor NO Silicon Steel 0.50mm x 280mm
Non-oriented silicon electrical steel for heavy industrial motors, 0.50mm thick, 280mm wide coil. HTS 7226.19.90.00 for other silicon electrical steel <300mm width, alloy per US note definitions. Used where high permeability needed.
Transformer Grade Silicon Steel Narrow Strip 0.23mm x 100mm
Premium narrow silicon electrical steel strip for distribution transformers, 0.23mm x 100mm, grain non-oriented. Fits HTS 7226.19.90.00 as flat-rolled alloy silicon electrical steel <300mm. Silicon alloy enhances magnetic performance.
Fractional HP Motor Silicon Steel 0.42mm x 180mm
Silicon electrical steel for fractional horsepower motors in HVAC systems, 0.42mm thickness, 180mm width. HTS 7226.19.90.00: other alloy steel silicon electrical, width <300mm. Alloy composition avoids tool/razor blade steel notes.