0.35mm Conventional Grain-Oriented Silicon Steel 180mm Wide
Conventional grain-oriented (CGO) silicon electrical steel at 0.35mm thickness and 180mm width for medium-power transformers. Meets HTS 7226.11.90 as grain-oriented alloy steel of silicon-electrical grade with width less than 300mm.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If powder-patterned or universal mill plate
Certain alloy steel products with patterns or specific rolling (universal mill) fall under 7225.30 per Chapter notes.
If width 300-600mm, grain-oriented
Width threshold determines subheading within grain-oriented silicon electrical steel.
If further worked with flat-rolled surface treatment
Chapter note defines 'further worked' (coated, polished) products as shifting out of Chapter 72 raw steel headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document silicon content (typically 3.0-3.5%) and electrical steel certification
• Ensure declaration specifies 'grain-oriented'—misclassification to non-oriented doubles potential duties
Related Products under HTS 7226.11.90
Grain-Oriented Silicon Electrical Steel Coil 0.27mm x 150mm
This is a flat-rolled coil of grain-oriented silicon electrical steel with 3% silicon content, measuring 0.27mm thick and 150mm wide, designed for transformer cores. It falls under HTS 7226.11.90 as it is alloy steel containing silicon, grain-oriented for optimal magnetic properties, and under 300mm width. The grain orientation minimizes core losses in electrical applications.
Hi-B Grain-Oriented Electrical Steel Strip 0.30mm x 250mm
Hi-B (High-B) grade grain-oriented silicon electrical steel strip, 0.30mm thick by 250mm wide, optimized for distribution transformers with superior magnetic flux density. HTS 7226.11.90 applies to this narrow-width (<300mm), grain-oriented silicon alloy product for electrical use.
GOES Transformer Lamination Steel 0.23mm x 200mm
High-permeability grain-oriented electrical steel (GOES) sheet at 0.23mm thickness and 200mm width, used for efficient transformer laminations. Classified under HTS 7226.11.90 due to its silicon alloy composition, specific grain orientation for reduced eddy currents, and narrow width under 300mm.
Domain-Refined GOES Sheet 0.27mm x 120mm
Domain-refined grain-oriented electrical steel sheet (0.27mm x 120mm) with laser-scribed domains for low-loss transformer applications. Classifies under HTS 7226.11.90 as basic grain-oriented silicon electrical steel strip under 300mm wide, prior to lamination processing.