0.18mm Conventional Grain-Oriented GOES Coil 290mm Wide
Ultra-thin 0.18 mm conventional grain-oriented silicon electrical steel coil, 290 mm width, for efficient power and distribution transformers. Matches HTS 7226.11.9030 criteria: alloy steel, silicon electrical, grain-oriented, <300 mm width, thickness not over 0.25 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If grain not oriented
Non-grain-oriented silicon electrical steel uses 7226.12, differentiated by magnetic grain alignment.
If carbon steel, not alloy
Products lacking alloying elements per Chapter 72 definitions (e.g., insufficient silicon) classify as plated/coated carbon steel.
If other alloy steel, electrical but not silicon-grade
Non-silicon electrical alloys fall under general other alloy steel provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit gaussmeter/orientation test results to prove grain-oriented structure vs non-oriented alternatives
• Use precise calipers for thickness; tolerances must stay ≤0.25 mm post-rolling
• Document as 'flat-rolled products,' not strip if edges not trimmed to exact parallel
Related Products under HTS 7226.11.90.30
Grain-Oriented Silicon Electrical Steel Coil 0.23mm x 250mm
Thin flat-rolled coil of grain-oriented silicon electrical steel with 3% silicon content, measuring 0.23 mm thick and 250 mm wide, designed for transformer core laminations. Classified under HTS 7226.11.9030 due to its alloy steel composition, grain-oriented structure, width under 300 mm, and thickness not exceeding 0.25 mm. The silicon enhances electrical resistivity and minimizes core losses in magnetic applications.
GOES Transformer Lamination Steel Sheet 0.25mm x 280mm
Grain-oriented electrical steel sheets (GOES) at 0.25 mm thickness and 280 mm width, optimized with specific silicon alloying for low core loss in power transformers. Falls under HTS 7226.11.9030 as flat-rolled alloy steel of silicon electrical grade, grain-oriented, under 300 mm width, and ≤0.25 mm thick. Not further worked beyond basic rolling.
Hi-B Grain-Oriented Steel Strip 0.20mm x 150mm
High-permeability (Hi-B) grain-oriented silicon electrical steel strip, 0.20 mm thick and 150 mm wide, used in distribution transformer cores for superior magnetic efficiency. HTS 7226.11.9030 applies to this alloy steel product due to its precise thickness ≤0.25 mm, grain-oriented silicon electrical characteristics, and width <300 mm.
Laser-Scribed GOES Sheet 0.23mm x 200mm for Transformers
Laser-scribed grain-oriented silicon electrical steel sheets (0.23 mm thick, 200 mm wide) with domain refinement for reduced noise in transformers. Still basic rolled product under HTS 7226.11.9030 as scribing doesn't constitute Chapter 72 'further working'; meets alloy, silicon electrical, grain-oriented, narrow width specs.