Cold-Rolled 34CrNiMo6 Alloy Steel Sheet
Cold-reduced 34CrNiMo6 nickel-chromium-molybdenum steel sheet, 2.7 mm thick x 850 mm wide, for nitriding applications. HTS 7225.50.8080 covers this other alloy steel cold-rolled product configuration.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If hot-rolled condition despite thin gauge
Processing method (hot vs cold-rolled) determines heading 7226 vs 7225 structure.
If thickness exceeds 4.75 mm
Clear thickness breakpoint at 4.75 mm separates 7225.50 from 7225.40 subheadings.
If considered 'universal mill plate' per note 72(b)
Universal mill plate definition (width 150-1250mm, ≥4mm thick) triggers specific flat-rolled classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mill test report must specify cold-reduction percentage; check for Section 232 tariffs on steel; label coils/plates clearly with HTS and dimensions
Related Products under HTS 7225.50.80.80
Cold-Rolled AISI 4130 Alloy Steel Sheet
Flat-rolled product of chromium-molybdenum alloy steel (AISI 4130) with 0.28-0.33% carbon, 0.8-1.1% chromium, and 0.15-0.25% molybdenum, cold-rolled to a thickness of 3 mm and width of 800 mm. Classified under HTS 7225.50.8080 as other alloy steel, cold-rolled, not further worked, thickness less than 4.75 mm, width 600 mm or more. Meets alloy steel definition but not tool steel or other specified types.
Cold-Rolled AISI 4340 High-Strength Alloy Steel Plate
Cold-reduced flat-rolled AISI 4340 steel plate (Ni-Cr-Mo alloy) at 2.5 mm thickness and 1200 mm width, used in aerospace components. Falls under HTS 7225.50.8080 for other cold-rolled alloy steel products, width ≥600 mm, thickness <4.75 mm, not further worked. Alloy composition: 0.38-0.43% C, 1.65-2.0% Ni, 0.7-0.9% Cr.
Cold-Rolled AISI 8620 Case-Hardening Alloy Steel Sheet
Cold-rolled sheet of AISI 8620 alloy steel (Ni-Cr-Mo), 1.8 mm thick, 750 mm wide, for carburizing applications in gears. HTS 7225.50.8080 applies to other alloy steel cold-rolled products not further worked, width ≥600 mm, thickness <4.75 mm.
Cold-Rolled 15B30 Boron Alloy Steel Strip
Flat-rolled 15B30 medium-carbon boron-alloy steel, cold-reduced to 3.2 mm thickness, 900 mm width, for automotive springs. Classified HTS 7225.50.8080 as other cold-rolled alloy steel, not further worked, meeting width/thickness specs.
Cold-Rolled AISI 9310 Aerospace Alloy Steel Sheet
Precision cold-rolled AISI 9310 carburizing alloy steel sheet, 2.0 mm x 1000 mm, for aircraft gears and bearings. HTS 7225.50.8080 for other non-specialty alloy steel cold-rolled products, width ≥600 mm, <4.75 mm thick, no further working.
Cold-Rolled 40NiCrMo7 Gear Steel Plate
EN 40NiCrMo7 alloy steel plate cold-rolled to 3.8 mm thickness, 1100 mm width, for heavy-duty gear manufacturing. Fits HTS 7225.50.8080 as other cold-rolled alloy steel flat products not further worked.