H13 Hot Work Tool Steel Sheet
H13 chromium-molybdenum hot work tool steel hot-rolled sheet, 4.2 mm thick, 850 mm wide for dies. Classified under 7225.40.51 as qualifying tool steel flat-rolled ≥600 mm wide, <4.75 mm, not further worked than hot-rolled.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If high-strength steel
High-strength specs (yield point limits) take precedence over tool steel.
If universal mill plate form
Universal mill plates 150-1250mm wide, ≥4mm thick have specific note (b).
If silicon-electrical steel
Electrical steels with silicon content classified separately.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• H13 common for dies; provide typical analysis (5% Cr, 1.3% Mo) documentation
• Scale must remain to prove hot-rolled status; descaled = further worked
• Thickness gauging critical near 4.75 mm cutoff
Related Products under HTS 7225.40.51
D2 Tool Steel Hot-Rolled Sheet
Flat-rolled D2 tool steel sheet, hot-rolled, not further worked, 3 mm thick and 800 mm wide, used for making cutting tools and dies. Classified under HTS 7225.40.51 as flat-rolled alloy tool steel of width 600 mm or more, thickness under 4.75 mm, not in coils and not further worked than hot-rolled. Meets U.S. note (e) definition for tool steel with over 1.2% carbon and over 10.5% chromium.
A2 Tool Steel Hot-Rolled Plate
Hot-rolled A2 air-hardening tool steel plate, 3.5 mm thick, 1000 mm wide, for blanking and forming dies. Falls under HTS 7225.40.51 as other alloy tool steel, hot-rolled not in coils, thickness <4.75 mm, width ≥600 mm. Conforms to tool steel definition (e)(ii) with 0.3-1.2% C and 1.25-10.5% Cr.
O1 Tool Steel Hot-Rolled Sheet
O1 oil-hardening tool steel hot-rolled sheet, 2.8 mm thick x 700 mm wide, for gauges and fixtures. HTS 7225.40.51 applies to this flat-rolled tool steel not further worked than hot-rolled, width ≥600 mm, thickness <4.75 mm. Qualifies under tool steel note (e)(iii) with ≥0.85% C and 1-1.8% Mn.
CPM-M4 Tool Steel Hot-Rolled Sheet
CPM-M4 powder metallurgy tool steel hot-rolled sheet, 2.5 mm thick, 650 mm wide for wear parts. Under HTS 7225.40.51 as tool steel flat-rolled product meeting Chapter 72 tool steel criteria, hot-rolled not further worked.
S7 Tool Steel Hot-Rolled Plate
S7 shock-resisting tool steel plate, hot-rolled 4 mm thick, 900 mm wide, for impact tools. Classified HTS 7225.40.51: alloy tool steel flat-rolled, ≥600 mm wide, <4.75 mm thick, hot-rolled not further worked, not in coils.
M2 High-Speed Tool Steel Sheet
M2 molybdenum high-speed tool steel hot-rolled sheet, 3.2 mm x 750 mm, for cutting tools. HTS 7225.40.51 for flat-rolled tool steel hot-rolled only, width 600+ mm, thickness <4.75 mm. Meets note (e)(v) ≥0.5% C and ≥3.5% Mo.