A2 Tool Steel Hot-Rolled Coil
Flat-rolled A2 tool steel coil, 3 mm thick and 1200 mm wide, hot-rolled without further working like polishing or coating. Classified under HTS 7225.30.51.80 as other alloy tool steel per U.S. note (e) definition (not less than 0.3% carbon and 1.25-10.5% chromium), in coils, thickness under 4.75 mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If subjected to further working like polishing or coating
Chapter note defines 'further worked' products (polishing, coating, etc.) as shifting to 'other' subheadings.
If thickness of 4.75 mm or more
Thickness threshold separates classifications within 7225.30 hot-rolled coils.
If not qualifying as tool steel alloy per note (e)
Non-tool alloy steel hot-rolled coils fall under Chapter 72 general alloy steel headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify exact chemical composition at entry to meet U.S. note (e) tool steel criteria (e.g
• C ≥0.3%, Cr 1.25-10.5%)
• Verify product is not 'further worked' per chapter note (no polishing, coating, etc.) to avoid reclassification
• Provide mill test certificates showing hot-rolled state and dimensions to prevent disputes on thickness/width
Related Products under HTS 7225.30.51.80
D2 Tool Steel Hot-Rolled Coil Sheet
D2 high-carbon high-chromium tool steel hot-rolled in coils, 2.5 mm thick, 1500 mm wide, for die making. Meets HTS 7225.30.51.80 as 'other' tool steel (note e(ii): ≥0.3% C, 1.25-10.5% Cr), not further worked, width ≥600 mm, thickness <4.75 mm.
O1 Tool Steel Hot-Rolled Coil
O1 oil-hardening tool steel flat-rolled product in hot-rolled coils, 3.8 mm thick, 1000 mm wide, used for tooling. HTS 7225.30.51.80 applies to this 'other' tool steel (note e(v): ≥0.5% C, ≥3.5% Mo), coil form, proper dimensions.
S7 Tool Steel Hot-Rolled Coil
Shock-resisting S7 tool steel hot-rolled coil, 4.2 mm thick, 800 mm wide, for impact tools. Fits HTS 7225.30.51.80 as other tool steel alloy (note e criteria met with C and Cr/Mo content), hot-rolled only, correct specs.
M2 High-Speed Tool Steel Coil
M2 molybdenum high-speed tool steel hot-rolled in wide coils, 1.8 mm thick, 1400 mm wide. HTS 7225.30.51.80 for 'other' tool steel (meets note e(iv): 0.9-1.2% Cr, 0.9-1.4% Mo), no further processing.
H13 Tool Steel Hot-Rolled Coil
H13 hot work tool steel flat coil, 3.2 mm thick, 1100 mm wide, hot-rolled condition only. Classified HTS 7225.30.51.80 as other tool steel (note e(i): >1.2% C, >10.5% Cr variant), for dies and molds.