A2 Tool Steel Hot-Rolled Coil
Hot-rolled A2 air-hardening tool steel coil, 5.5 mm thick, 1000 mm wide, not further worked. Meets HTS 7225.30.11 as tool steel with 0.3-1.2% carbon and 1.25-10.5% chromium per US note (e), supplied in coils for die making.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness under 4.75 mm
Thinner hot-rolled tool steel coils use 7225.40 subheading within same width category
If carbon steel rather than alloy tool steel
Lacks required alloy elements for tool steel definition, defaults to carbon steel flat products
If other alloy steel not specifically tool steel
Non-tool alloy compositions fall under general 'other alloy steel' in 7225.99
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit chemical analysis report proving tool steel elements (e.g
• Cr 5.0-5.25%); Measure coil width precisely as under 600 mm shifts to 7226; Declare as 'not further worked' - any coating voids this code
Related Products under HTS 7225.30.11
D2 Tool Steel Hot-Rolled Coil
Flat-rolled D2 tool steel coil, 6 mm thick and 800 mm wide, hot-rolled without further working like polishing or coating. Classified under HTS 7225.30.11 as alloy tool steel meeting the definition with over 1.2% carbon and more than 10.5% chromium, in coils over 600 mm wide and 4.75 mm thick.
O1 Tool Steel Hot-Rolled Coil
O1 oil-hardening tool steel hot-rolled coil, 7 mm thick and 750 mm wide, in coil form without further processing. HTS 7225.30.11 applies due to tool steel specs with 0.85-1.1% carbon and 1-1.8% manganese per note (e)(iii).
S7 Tool Steel Hot-Rolled Coil
Shock-resisting S7 tool steel hot-rolled in coils, 8.2 mm thick, 900 mm width, not further worked. Qualifies for 7225.30.11 as tool steel with specified carbon and chromium/molybdenum content per US chapter note (e).
M2 High-Speed Tool Steel Coil
M2 molybdenum high-speed tool steel hot-rolled coil, 4.8 mm thick, 1200 mm wide. HTS 7225.30.11 for tool steel containing 0.5%+ carbon and 3.5%+ molybdenum meeting note (e)(v), in wide coils.
CPM-M4 Tool Steel Hot-Rolled Coil
Particle metallurgy CPM-M4 tool steel hot-rolled coil, 6.5 mm x 950 mm, for wear-resistant tooling. Fits 7225.30.11 as powder metal tool steel with high carbon/chromium per definition, not further worked.