M2 High-Speed Steel Hot-Rolled Coil
Flat-rolled M2 high-speed steel coil, 6 mm thick and 800 mm wide, hot-rolled without further surface treatment. Classified under HTS 7225.30.11.10 as it meets high-speed steel composition (typically 0.85% C, 4% Cr, 5% Mo, 2% V) and fits the dimensions for tool steel hot-rolled in coils.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not meeting high-speed steel definition
Falls under other tool steel if lacking specific high-speed alloy elements like tungsten or molybdenum combinations.
If carbon steel rather than alloy
Carbon steel flat-rolled products go to Chapter 72 heading 7208, lacking required alloying elements for tool steel.
If cold-rolled instead of hot-rolled
Cold-rolled alloy steel products classify under 7225.99, as hot-rolled in coils is specific to this subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test certificate confirming high-speed steel alloy composition per HTS Chapter 72 note (e.g
• >0.5% C with specific W/Mo/V)
• Ensure product is truly 'not further worked' - no polishing, coating, or chemical treatments beyond hot-rolling
• Verify thickness ≥4.75mm and width ≥600mm; slight measurement variances can trigger reclassification
Related Products under HTS 7225.30.11.10
T1 High-Speed Steel Hot-Rolled Coil
Tungsten-type T1 high-speed steel hot-rolled coil, 5.5 mm thick, 1000 mm wide, for cutting tool blanks. Meets HTS 7225.30.11.10 criteria as high-speed tool steel (0.7% C, 18% W, 4% Cr, 1% V) hot-rolled in coils ≥4.75 mm thick.
M42 High-Speed Steel Hot-Rolled Coil
Cobalt-bearing M42 high-speed steel coil, 7 mm thick and 750 mm wide, hot-rolled for drill bit stock. Classified in 7225.30.11.10 due to high-speed steel properties (1.1% C, 3.75% Cr, 9.5% Mo, 1.5% V, 1% Co).
S7 High-Speed Steel Hot-Rolled Coil
Shock-resisting S7 high-speed steel hot-rolled coil, 8.2 mm thick, 900 mm wide, for punch tooling. Fits HTS 7225.30.11.10 as high-speed tool steel hot-rolled in coils with specified thickness/width.
PM M4 High-Speed Steel Hot-Rolled Coil
Powder metallurgy M4 high-speed steel coil, 5 mm thick, 650 mm wide, hot-rolled condition. HTS 7225.30.11.10 applies to this high-speed steel (1.3% C, 4% Cr, 5.25% Mo, 4% V) meeting dimensional requirements.
D2 High-Speed Steel Hot-Rolled Coil
High-carbon high-chromium D2 steel coil marketed as high-speed grade, 6.5 mm thick, 1200 mm wide. Classifies under 7225.30.11.10 when certified as high-speed steel meeting Chapter 72 composition requirements.
M35 High-Speed Steel Hot-Rolled Coil
M35 cobalt-molybdenum high-speed steel hot-rolled coil, 4.8 mm thick, 700 mm wide, for milling cutters. HTS 7225.30.11.10 due to high-speed steel composition and hot-rolled coil form ≥4.75 mm thick.