15CrMo Structural Alloy Flat Slab
15CrMo (1.5% Cr, 0.5% Mo) alloy steel flat slab for pressure vessels, rectangular cross section ≥4:1 width:thickness ratio, hot-rolled semi-finished. HTS 7224.90.0055 for rectangular other alloy steel products.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If razor blade steel specs
Thin stainless (<0.25mm, <23mm wide, ≤14.7% Cr) for razors per note (d).
If angles/profiles not flat rectangular
Different profiles classified in 7226.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Chemical cert must show total alloying elements >10% but exclude tool steel combos
• Verify slab flatness doesn't imply further working
• Bulk packaging preferred over retail to maintain semi-finished status
Related Products under HTS 7224.90.00.55
34CrNiMo6 Quenched Alloy Flat Slab
EN 34CrNiMo6 nickel-chromium-molybdenum steel flat slab for heavy shafts, hot-rolled semi-finished with flat rectangular profile ≥4:1 ratio. Classified under HTS 7224.90.0055 other alloy steel.
AISI 4340 Nickel-Chromium-Molybdenum Flat Slab
AISI 4340 low-alloy steel flat slab in semi-finished form with width at least four times thickness, used for aerospace and structural applications. Falls under HTS 7224.90.0055 as rectangular cross-section other alloy steel, excluding special definitions like razor blade or ball-bearing steel.
AISI 8620 Carburizing Grade Flat Slab
AISI 8620 nickel-chromium-molybdenum carburizing steel slab with flat rectangular profile (width 4+ times thickness) for gear manufacturing. Classified HTS 7224.90.0055 as semi-finished other alloy steel, not meeting ball-bearing or heat-resisting definitions.
HY-80 High-Yield Alloy Steel Flat Billet
HY-80 quenched and tempered alloy steel flat billet (rectangular, width ≥4x thickness) for submarine/shipbuilding hull plate stock. HTS 7224.90.0055 for other alloy semi-finished excluding high-strength steel yield specs.
AISI 4130 Chromoly Flat Bar Stock
AISI 4130 chromium-molybdenum low alloy steel flat bar stock, semi-finished with rectangular section width at least four times thickness, aircraft grade. Under HTS 7224.90.0055 as other (non-specialty defined) alloy steel.
AISI 4330V Modified Alloy Flat Billet
AISI 4330V vacuum-melted Ni-Cr-Mo alloy steel flat billet for landing gear, rectangular with width 4+ times thickness. Fits HTS 7224.90.0055 other alloy semi-finished excluding defined specialty steels.