Martensitic 410 Stainless Wire 2.2 mm
Hardenable martensitic AISI 410 stainless round wire 2.2 mm for cutlery blanks and pump shafts. Under HTS 7223.00.10.61 stainless wire diameter spec. Chapter 72 semis.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If razor blade steel per Note (d)
Thin stainless for razors has dedicated classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Hardness test results if tempered; cutlery use declaration; avoid razor blade steel confusion
Related Products under HTS 7223.00.10.61
AISI 304L Low Carbon Wire 3.0 mm
Low-carbon AISI 304L stainless round wire 3.0 mm diameter, weldable grade for food processing equipment. HTS 7223.00.10.61 exact diameter match. Stainless in Chapter 72.
Super Duplex 2507 Wire 1.9 mm
Super duplex SAF 2507 stainless round wire 1.9 mm for offshore platform cabling and risers. Fits HTS 7223.00.10.61 diameter for stainless. High alloy steel chapter.
AISI 317LMN Stainless Wire 4.8 mm
High molybdenum AISI 317LMN stainless round wire 4.8 mm for urea plant reactors. HTS 7223.00.10.61 stainless wire under 5.1 mm. Chapter 72 classification.
AISI 304 Stainless Steel Round Wire 2.5 mm
Round stainless steel wire made from AISI 304 alloy with a diameter of 2.5 mm, suitable for welding applications and mechanical springs. Classified under HTS 7223.00.10.61 as stainless steel round wire measuring 1.52 mm or more but less than 5.1 mm in diameter, not further worked beyond drawing. This falls within Chapter 72 for iron and steel articles.
AISI 316L Stainless Steel Welding Wire 3.2 mm
High-corrosion resistant AISI 316L stainless steel round wire, 3.2 mm diameter, used in MIG/TIG welding for marine and chemical applications. Fits HTS 7223.00.10.61 for stainless round wire 1.52-5.1 mm, drawn but not further worked. Chapter 72 covers such semi-finished steel products.
17-4 PH Stainless Steel Spring Wire 1.8 mm
Precipitation-hardening 17-4 PH stainless steel round wire at 1.8 mm diameter for high-strength compression and torsion springs. HTS 7223.00.10.61 applies to stainless round wire in 1.52-5.1 mm range, not meeting tool steel definitions. Positioned in Chapter 72 for stainless steel products.