409 Stainless Steel Automotive Wire 1.5 mm
AISI 409 ferritic stainless round wire 1.5 mm diameter (<1.52 mm limit) for exhaust hangers and clamps. HTS 7223.00.1046 stainless round wire size classification, economical grade not special alloy per notes. Uncoated condition per chapter further-worked exclusion.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sold as set with muffler clamps
Articles presented as sets for exhaust systems classify under Chapter 73 other articles.
If bars not wire
Circular cross-section bars/rods over wire diameters go to 7213 stainless bars.
If phosphatized surface
Chemical surface treatments = further worked per note, to 7228.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Confirm <1.52 mm with multiple measurements; tolerances tight
ā¢ Automotive certs optional but help prove commercial value
Related Products under HTS 7223.00.10.46
17-4 PH Precipitation Hardening Stainless Wire 0.8 mm
17-4 PH (precipitation hardening) stainless steel round wire at 0.8 mm diameter for aerospace fasteners and high-strength applications. HTS 7223.00.1046 applies to this stainless round wire size (0.76-<1.52 mm), martensitic grade not meeting tool steel note (e) criteria, uncoated. Chapter 72 covers such stainless products without special alloy exclusions.
AISI 304 Stainless Steel Round Wire 1.0 mm
Round stainless steel wire made from AISI 304 alloy with a diameter of 1.0 mm, not plated or coated, used in spring manufacturing and mesh weaving. Classified under HTS 7223.00.1046 as stainless steel round wire measuring 0.76 mm or more but less than 1.52 mm in diameter, falling within Chapter 72's provisions for non-alloyed stainless wire not further worked. Meets standard stainless steel composition requirements per chapter notes.
AISI 316 Stainless Steel Wire 1.2 mm Diameter
High-corrosion resistant AISI 316 stainless round wire, 1.2 mm diameter, uncoated and suitable for medical device components and welding applications. Fits HTS 7223.00.1046 as round stainless steel wire in the specified diameter range (0.76 mm to <1.52 mm), not further worked per chapter note definitions. Standard austenitic stainless composition aligns with Chapter 72 scope.
Duplex 2205 Stainless Steel Round Wire 1.4 mm
Duplex 2205 (UNS S31803) stainless wire, 1.4 mm diameter, offering high strength and corrosion resistance for marine hardware. Classified in HTS 7223.00.1046 for stainless round wire 0.76 mm+ to <1.52 mm, not further worked, standard stainless per Chapter 72 without special exclusions like razor blade or ball-bearing steel.
AISI 321 Stainless Steel Annealed Wire 1.1 mm
Stabilized AISI 321 stainless round wire, 1.1 mm diameter, annealed for weldability in exhaust system components. HTS 7223.00.1046 covers this uncoated stainless round wire in the 0.76-<1.52 mm range per Chapter 72 wire provisions. Annealing is metallurgical, not 'further worked' surface treatment.
430 Ferritic Stainless Steel Wire 0.9 mm
AISI 430 ferritic stainless round wire, 0.9 mm diameter for decorative trim and appliance parts. Fits HTS 7223.00.1046 as stainless round wire 0.76 mm+ <1.52 mm, magnetic ferritic grade not heat-resisting or tool steel per notes. Unplated, aligns with Chapter 72 base wire classification.