Stainless Steel L-Profile Angle 30x30x4mm 304 Grade
Equal-leg L-shaped hot-rolled angle from 304 stainless steel, 30mm x 30mm x 4mm, max dimension <80mm. HTS 7222.40.30.65 applies to these not advanced stainless angles for structural use in furniture and handrails.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If used as concrete reinforcing with deformations
Deformed bars/rods for concrete reinforcement classified as fittings in 7304 per US note (c).
If drilled, punched, or cold-formed
Any advancement beyond hot-rolling moves to 'other' categories excluding simple angles.
If from carbon steel, not stainless
Base material (stainless vs carbon) shifts from heading 7222 to 7214.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include heat number traceability on commercial invoice; inspect for any polishing or coating that constitutes 'further worked' per chapter notes
• Confirm hot-rolled status via production records
Related Products under HTS 7222.40.30.65
Hot-Rolled 304 Stainless Steel Angle Bar 25x25x3mm
Hot-rolled angle bar made from 304 stainless steel with equal legs of 25mm and 3mm thickness, maximum cross-section under 80mm. Classified under HTS 7222.40.30.65 as hot-rolled stainless steel angles, not drilled, punched, or further advanced beyond rolling. Used in structural framing for machinery guards and light architectural supports.
316L Stainless Steel Equal Angle 40x40x5mm Hot-Rolled
Hot-rolled 316L stainless steel angle with 40mm equal legs and 5mm thickness, cross-section under 80mm, suitable for marine environments. Fits HTS 7222.40.30.65 as stainless steel angles hot-rolled without drilling, punching, or advanced processing. Commonly used in food processing equipment frames.
Duplex 2205 Stainless Angle Bar 20x20x3mm Hot-Rolled
High-strength duplex 2205 stainless steel hot-rolled angle, 20mm equal sides x 3mm thick, cross-section <80mm. Classifies under 7222.40.30.65 for stainless angles not further processed, ideal for corrosive industrial applications.
430 Stainless Steel Angle Section 35x35x4.5mm
Hot-rolled 430 ferritic stainless steel equal angle 35x35x4.5mm, max cross-section <80mm, no drilling or punching. HTS 7222.40.30.65 covers these basic stainless shapes for automotive trim and appliances.
321 Stainless Steel Hot-Rolled Angle 50x50x6mm
Austenitic 321 stainless angle hot-rolled with 50mm legs x 6mm thickness, under 80mm cross-section, not advanced. Under HTS 7222.40.30.65 for stainless steel angles used in high-temperature exhaust systems.
17-4 PH Stainless Precipitation Hardening Angle 28x28x4mm
Hot-rolled 17-4 PH stainless steel angle bar 28mm x 28mm x 4mm, cross-section <80mm, for aerospace brackets. HTS 7222.40.30.65 as basic hot-rolled stainless angles without advancement.