Custom 9-4-2 Stainless Hot-Drawn Rod 14% Nickel
Custom 9-4-2 (9Cr-4Mo-2W) stainless steel rod with 14% nickel, hot-drawn condition. Fits HTS 7222.19.00.54 as other stainless bars/rods with specified nickel range. Turbine and valve applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ball-bearing steel per US Note 72(h)
Specific bearing steel compositions classified in cold-finished headings.
If high-strength steel per US Note 72(a)
Strength specifications override for certain flat-rolled products.
If chipper knife steel alloy
US Note 72(f) defines exact composition for separate classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide detailed chemical analysis for non-standard alloys
• Confirm hot-working method in manufacturing records
• Watch for chipper knife steel misclassification per US Note 72(f)
Related Products under HTS 7222.19.00.54
Hot-Drawn Stainless Steel Hexagonal Rod 10% Nickel
Hexagonal rod produced by hot-drawing stainless steel alloy with 10% nickel, not further worked. Meets HTS 7222.19.00.54 criteria for other stainless steel bars/rods with specified nickel range. Used in pump shafts and valve stems.
Hot-Rolled Stainless Steel Round Bar 12% Nickel
A hot-rolled round bar made from stainless steel alloy containing 12% nickel by weight, not further worked beyond hot-rolling. This falls under HTS 7222.19.00.54 due to its nickel content between 8-24%, hot-rolled form, and classification as other bars and rods of stainless steel. Commonly used in marine and chemical processing equipment for corrosion resistance.
Hot-Extruded Stainless Steel Flat Bar 15% Nickel
Hot-extruded flat bar of stainless steel with 15% nickel content, supplied in straight lengths without additional processing. Classified under HTS 7222.19.00.54 for other hot-rolled/hot-drawn/extruded bars with 8-24% nickel. Ideal for structural components in acidic environments.
Hot-Rolled Stainless Steel Square Bar 18% Nickel
Square cross-section stainless steel bar, hot-rolled with 18% nickel content, untreated beyond rolling. Falls precisely under HTS 7222.19.00.54 as other hot-rolled stainless bars with 8-<24% nickel. Applied in food processing equipment.
UNS S28200 Hot-Extruded Stainless Rod 9% Nickel
UNS S28200 alloy stainless steel rod, hot-extruded with approximately 9% nickel, not further worked. Classified in HTS 7222.19.00.54 for its nickel content and processing method. Suitable for aerospace fasteners.
Incoloy 800H Hot-Rolled Bar 20% Nickel Equivalent
Incoloy 800H stainless steel bar (approx 20% nickel equivalent), hot-rolled and supplied mill finish. HTS 7222.19.00.54 applies to this 8-24% nickel stainless bar/rod. Used in heat exchangers and piping.