Incoloy 800 Hot-Rolled Round Bar
A high-nickel alloy steel round bar made from Incoloy 800 (UNS N08800), containing over 30% nickel and 20% chromium, hot-rolled to a circular cross-section of 25mm diameter. Classified under HTS 7222.11.00.06 as a not further worked bar of high-nickel alloy stainless steel per chapter notes. Used in chemical processing equipment for corrosion resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cold-rolled or further worked
Cold-formed or ground bars move to 7222.30 as further worked, per chapter note on surface treatments.
If not stainless or alloy per definitions
Non-stainless iron/steel bars fall under Chapter 72 heading 7221, lacking required chromium/nickel for stainless classification.
If circular cross-section but not high-nickel alloy
Standard stainless steel circular bars classify under 7222.19.00, excluding high-nickel variants.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Certify nickel content exceeds chapter thresholds for high-nickel alloy steel; provide mill test reports confirming hot-rolled status and no further working like polishing
• Watch for reclassification if diameter exceeds typical bar sizes into wire rod categories
Related Products under HTS 7222.11.00.06
Inconel 625 Hot-Extruded Rod
Hot-extruded round rod of Inconel 625 (UNS N06625), a high-nickel superalloy with 58% minimum nickel, 20-23% chromium, and molybdenum for pitting resistance, 19mm diameter. Fits HTS 7222.11.00.06 for high-nickel alloy steel bars/rods of circular cross-section, not further worked. Ideal for aerospace turbine components.
Hastelloy C-276 Hot-Rolled Bar
Hot-rolled circular bar of Hastelloy C-276 (UNS N10276), high-nickel alloy steel with 57% nickel, 16% molybdenum, and 15-17% chromium for extreme corrosion resistance, 38mm diameter. HTS 7222.11.00.06 applies to its high-nickel stainless steel composition, hot-rolled not further worked status.
Monel 400 Hot-Drawn Round Rod
Hot-drawn rod from Monel 400 (UNS N04400), nickel-copper alloy steel with 63% min nickel and 28-34% copper, circular 12mm diameter for marine applications. Meets HTS 7222.11.00.06 as high-nickel alloy stainless steel bar/rod, not further worked.
Alloy 20 Hot-Rolled Stainless Rod
Hot-rolled round rod of Carpenter 20Cb3 (Alloy 20, UNS N08020), high-nickel stainless with 32-38% nickel, used in sulfuric acid handling, 50mm diameter. HTS 7222.11.00.06 for its high-nickel alloy steel, circular cross-section, hot-rolled condition.
Incoloy 825 Extruded Round Bar
Hot-extruded bar of Incoloy 825 (UNS N08825), 38-46% nickel alloy steel with titanium stabilization, 30mm circular cross-section for oil/gas downhole tools. Classified HTS 7222.11.00.06 as high-nickel stainless bar not further worked.
Inconel 718 Hot-Rolled Rod
Age-hardenable Inconel 718 (UNS N07718) hot-rolled round rod, 52.5% min nickel with niobium, 19mm diameter for jet engine shafts. HTS 7222.11.00.06 due to high-nickel alloy stainless steel composition and hot-rolled circular form.