AISI 420 Stainless Steel Narrow Sheet
Cut-to-width 420 stainless steel sheet, 450 mm wide, 13% Cr, for cutlery blanks and surgical tools. HTS 7220.90.00.60 covers this cold-rolled stainless flat product <600 mm wide, <15% Cr, not further worked. Balances hardness and corrosion resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If patterns in relief or further worked
Relief patterns or additional working exclude from basic flat-rolled, to hollow drill profiles.
If of common steel, electrical grade
Non-stainless electrical silicon-electrical steel sheets <600 mm in Chapter 72.
If shaped into knife blades
Fabricated into interchangeable tools changes to Chapter 82 knives/blades.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include hardness/temper designation if applicable; affects end-use but not base classification
• Ensure no cladding/coating; 'further worked' per note moves to 7220.12+ or other
Related Products under HTS 7220.90.00.60
Ferritic 430 Stainless Steel Slit Strip
Slit strip of ferritic 430 stainless steel, 300 mm wide, 14% chromium max, used in appliance trim and fasteners. HTS 7220.90.00.60 applies to this narrow (<600 mm), low-chromium (<15%) flat-rolled stainless product, not further worked. Provides cost-effective corrosion resistance.
Low Chromium 439 Stainless Steel Foil
Thin 439 stainless steel foil strip, 200 mm wide, 14% stabilized chromium, for heat exchanger fins. Under HTS 7220.90.00.60 as flat-rolled stainless <600 mm, <15% Cr, basic form. Excellent for automotive and HVAC oxidation resistance.
11% Chromium Stainless Steel Trim Strip
Mill-edge trim strip of 11% Cr stainless steel, 150 mm wide, for architectural decorative edging. HTS 7220.90.00.60 for narrow stainless flat-rolled products with chromium under 15%. Provides aesthetic finish with durability.
13% Chromium Stainless Steel Shaving Strip
Narrow 13% Cr stainless steel strip for shaving instrument components, 100 mm wide. Under HTS 7220.90.00.60 as basic flat-rolled stainless <600 mm, <15% Cr. Precision for personal care manufacturing.
Stabilized 441 Stainless Steel Strip
441 stabilized ferritic stainless strip, 550 mm wide, <14% Cr with Ti/Nb, for exhaust tubing precursors. HTS 7220.90.00.60 applies to this <600 mm wide, low-Cr stainless flat-rolled product. Weldability enhanced by stabilizers.
AISI 405 Stainless Steel Strip
Flat-rolled stainless steel strip of AISI 405 grade, less than 600 mm wide, with approximately 11-14% chromium content, used in automotive exhaust systems. This falls under HTS 7220.90.00.60 as it is a narrow flat-rolled product of stainless steel containing less than 15% chromium by weight and not further worked. Ideal for applications requiring moderate corrosion resistance without high chromium levels.